Baumatic bfe320 Benutzerhandbuch

169890

1) Shelves
•  The shelves may be placed in any of the guide slots within the 

interior of the appliance. They are protected from sliding out.

•  To remove a shelf: Take off all of the items that are stored on 

the shelf that you want to remove. Then lift the front of the 
shelf and carefully pull it out of the grooves.

•  Certain models are equipped with a wire bottle rack, this is 

protected from being pulled out whilst bottles are stored in it.

•  It can only be removed with no bottles in it, by lifting the front 

section and pulling it towards you.

•  Place the bottle rack in the appliance, in such a way that it 

does not obstruct the closing of the door.

2) Defrost water outlet
•  The interior of the refrigerator is cooled by the cooling plate 

that is on the rear wall. Beneath this there is a channel and an 
outlet for the defrost water.

•  It is important that this channel never becomes clogged 

(see Defrosting the refrigerator compartment for a detailed 
explanation of how to keep the channel clear).

3) Crisper drawers and cover
•  The crisper drawer is in the bottom of your refrigerator and 

there is a cover that goes over it.

•  The cover helps to prevent fruit and vegetables from drying out 

prematurely.

4) Upper door shelves
•  The door liner holds various shelves, that are suitable for 

storing eggs, cheese, butter and yogurt. As well as smaller 
packages, tubes, cans etc.

5) Bottle shelf
•  The lower shelf should be used for storing reasonably sized 

bottles.

6) Fan (certain models only) 
•  The fan is located under the ceiling or hidden behind the rear 

panel of the refrigerator. This ensures even distribution of 
temperature and reduces condensation on the storage racks.

8

169890en.indd   8

169890en.indd   8

16.10.2006   11:36:23

16.10.2006   11:36:23