Baumatic br15a Benutzerhandbuch
16
Fitting the Décor Door
2) Fix the hanging
rail onto the inside
of the décor door
using two 10mm
screws, centering it
so that 262mm of
its width is on either
side of the
imaginary vertical
middle line of the
décor door.
of the décor door
using two 10mm
screws, centering it
so that 262mm of
its width is on either
side of the
imaginary vertical
middle line of the
décor door.
3) Clasp the eyelet holes in
the rail on the inside of the
décor door over the bolts
protruding from the top edge
of the refrigerator door.
Secure these using the nut
caps provided, as shown in
the above illustration. Make
sure that you have the décor
door attached levelly before
proceeding to the lower
fastenings as shown on right.
the rail on the inside of the
décor door over the bolts
protruding from the top edge
of the refrigerator door.
Secure these using the nut
caps provided, as shown in
the above illustration. Make
sure that you have the décor
door attached levelly before
proceeding to the lower
fastenings as shown on right.
1) Using a 2.8mm
diameter bit, make
holes sufficient to
attach the rail as
shown on the left.
NOTE – door area
below the rail
must reach to just
diameter bit, make
holes sufficient to
attach the rail as
shown on the left.
NOTE – door area
below the rail
must reach to just
below appliance.
NOTE:
You need
the tools
shown
here.
You need
the tools
shown
here.