Blomberg dv 16540 Betriebsanweisung

Seite von 24
22 - EN
Sensor 
There are humidity sensors in your machine 
that detect whether the laundry is dry or not.
For sensor cleaning;
1. Open loading door.
2. Allow machine to cool off if drying has been 
done recently.
3. Wipe the metal sensors with a soft cloth 
dampened with vinegar and dry the sensors 
afterwards.
Clean the metal sensors at regular 
intervals (4 times a year).
Never use solvents, cleaning agents 
or similar substances when cleaning 
as these might cause fire and/or an 
explosion! 
Lint filter 
Lint and fibers released from the laundry in to 
the air during the drying cycle are collected in 
the “Lint Filter”. 
C F
ibres and lint are formed during wearing 
and washing.
Always clean the filter after each drying 
cycle.
To clean the Filter;
1. Open loading door.
2. Remove the lint filter by pulling it up and 
open the filter.
3. Clean lint, fiber, and by hand or with a soft 
piece of cloth.
4. Close the filter and put it back in place.
You can clean the filter and filter area with a 
vacuum cleaner.
6
  Maintenance and cleaning