Blomberg ksm 1640 Betriebsanweisung

Seite von 90
Instruction Manual
GB
2
Electrical requirements
Before inserting the plug into the wall socket 
make sure that the voltage and the frequency 
shown in the rating plate inside the appliance 
corresponds to your electricity supply.
We recommend that this appliance be 
connected to the mains supply via a suitably 
switched and fused socket in a readily accessible 
position.
Warning! This appliance must be earthed.
Repairs to electrical equipment should only be 
performed by a qualified technician. Incorrect 
repairs carried out by an unqualified person 
carry risks that may have critical consequences 
for the user of the appliance.
• Do not dispose of the appliance on a fire. At 
 
, the care and protection of our 
environment is an ongoing commitment. This 
appliance which is among the latest range 
introduced is particularly environment friendly. 
Your appliance contains non CFC/HFC natural 
substances in the cooling system (called R600a) 
and the insulation (called cyclopentane) which 
are potentially flammable if exposed to fire. 
Therefore, take care not to damage, the cooling 
circuit/ pipes of the appliance in transportation 
and in use. In case of a damage do not expose 
the appliance to fire, potential ignition source 
and immediately ventilate the room where the 
appliance is situated.
• We suggest you contact your local authority 
for disposal information and facilities available.
WARNING- Keep ventilation openings, in the 
appliance enclosure or in the built-in structure, 
clear of obstruction.
WARNING- Do not use mechanical devices 
or other means to accelerate the defrosting 
process, other than those recommended by the 
manufacturer.
WARNING- Do not damage the refrigerant 
circuit.
WARNING- Do not use electrical appliances
inside the food storage compartments of the 
appliance, unless they are of the type 
recommended by the manufacturer.
Transportation 
instructions
1. The appliance should be transported only 
in upright position. The packing as supplied 
must be intact during transportation.
2. If during the course of transport the appliance,
has been positioned horizontally, it must not 
be operated for at least 4 hours, to allow the 
system to settle.
3. Failure to comply with the above instructions 
could result in damage to the appliance, for 
which the manufacturer will not be liable for.
4. The appliance must be protected against 
rain, moisture and other atmospheric influences.
Important!
• 
Care must be taken while cleaning/carrying 
the appliance not to touch the bottom of the 
condenser metal wires at the back of the 
appliance, as this could cause injury to fingers 
and hands.
• Do not attempt to sit or stand on top of your 
appliance as it is not designed for such use. 
You could injure yourself or damage the 
appliance.
• Make sure that the mains cable is not caught 
under the appliance during and after moving, 
as this could damage the cable.
• Do not allow children to play with the 
appliance or tamper with the controls.
Installation instructions
1. Do not keep your appliance in a room where 
the temperature is likely to fall below 10 degrees 
C (50 degrees F) at night and/or especially in 
winter, as it is designed to operate in ambient 
temperatures between +10 and +32 degrees 
C (50 and 90 degrees F). At lower temperatures 
the appliance may not operate, resulting in a 
reduction in the storage life of the food.
2. Do not place the appliance near cookers