Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Panasonic
  4. ag-3da1
  5. Benutzerhandbuch

Panasonic ag-3da1 Benutzerhandbuch

Download
Seite von 96
54
Recharging the built-in battery
The camera’s internal battery saves the date and 
time. 
When LOW INTERNAL BATTERY (indicating that 
the internal battery has no remaining charge) is 
displayed even when the date and time are set, 
it means that the charge of the internal battery is 
depleted. Do the following to recharge it.
Reset the date and time when fully recharged.
1
  Connect the AC adaptor. (Page 24)
Leave the POWER/Mode selector switch 
at OFF.
2
  Leave the camera like this for about 4 
hours.
The internal battery charges during this 
time.
Check the time code and menu operations 
after recharging.
If the date and time are not memorized after 
recharging, the internal battery requires 
changing. Please consult the place of purchase.
Setting the time code
In the setup menus, TC/UB SETUP screen, set 
the following time code related items. (Page 80)
TC MODE  
(Only when SYSTEM FREQ is set to 59.9 Hz)
TCG
TC PRESET
•
•
•
•
•
•
Charging the built-in battery/Setting the time code
Specifying the time code  
(TC PRESET)
Set TC PRESET so you can record a value of 
your choice as the initial setting for the time code 
to be used at the start of recording.
1
  Set the POWER/Mode selector switch to 
ON.
2
  Select the TC PRESET item on the settings 
menu TC/UB SETUP screen.
Menu operation (Page 75)
TC/UB SETUP
TC MODE
DF
TCG
REC RUN
TC PRESET
NO
UB PRESET
NO
3
  Tilt the Operation lever in the   direction 
to move to YES, and push the Operation 
lever.
YES
NO
TC PRESET
TC MODE
TCG
UB PRESET
TC PRESET
•