Panasonic ag-3da1 Benutzerhandbuch

81

Sets whether to output the signal from the HD SDI terminal.

ON:   The signal is output from the HD SDI terminal. It is not output from the 

HDMI terminal.

OFF:  The signal is not output from the HD SDI terminal. It is output from the 

HDMI terminal.

(Camera) Selects the sound heard through the headphones.

LIVE:   

 The sound which has been input from the microphone is output 

as is. This setting is selected when delays in the sound are 

annoying.

RECORDING:   The sound in the status which is to be recorded (the sound 

synchronized with the images) is output.

(Camera) Selects the brightness level of the left-leaning zebra patterns on the screen.

(Camera) Selects the brightness level of the right-leaning zebra patterns on the screen.

SAFETY ZONE (Camera) Sets whether to display the safety zone. (Page 69)

(Camera) Selects counter operation during recording.

TOTAL:   The count continues to increase until the RESET button is pressed 

to reset it. 

CLIP:   Resets the counter at start of recording and counts the time of each 

recording session.

In PB mode, operation is always in CLIP mode. 

•

(Camera) Select ON to output the information displayed on the screen together with the 

video signals.

ON  OFF

Time code, audio lever meter, and focus bar displays are not output.

•

(Camera) Sets whether to display the date and time on the screen together with the 

video signals.

TIME:  The time is displayed.

DATE:  The date is displayed.

TIME & DATE: The date and time are displayed.

OFF: 

The date and time are not displayed.

LEVEL METER (Camera) Select ON to display the audio level meter.

ON  OFF

(Camera) Sets whether to display the zoom and focus values.

ON  OFF

CONVERGENCE (Camera) Sets whether to display the position of the reference plane (relative value).

(Page 38)

ON  OFF

        indicates the factory setting.