Panasonic AG-DVC200 Betriebsanweisung

Before  use,  charge  the  battery  pack  using  the  exclusive  battery
charger made by Anton Bauer.
For  the  charging  time  and  other  details,  refer  to  the  operating
instructions of the battery charger used.

A  battery  holder  made  by  Anton  Bauer  is  equipped  with  a  power
output  connector  for  the  lighting  and  a  lighting  control  switch  to
enable  a  light  to  be  easily  attached.    For  details  on  the  lighting
systems available, contact Anton Bauer.

Select  the  battery  type  using  <BATTERY>  on  the  sub-menu
screen.
Example: Select  “NiCd13”  if  the  TRIMPAC13  is  to  be  used;

select  “NiCd14”  if  the  TRIMPAC14  is  to  be  used.
(See page 34)

Select  the  battery  type  using  <BATTERY>  on  the  sub-menu
screen.
Select “NiCd12” if the NP-1B is to be used.  (See page 34)

To remove the battery pack, slide it in the opposite direction to the
one in which it was attached while keeping the release lever on the
battery holder pulled down all the way.

Before  use,  charge  the  battery  pack  using  the  exclusive  battery
charger made by Sony.
For  the  charging  time  and  other  details,  refer  to  the  operating
instructions of the battery charger used.

Refer to step 

on page 10.

2

1

3

4

5

First, remove the battery holder cover.

1

Attach the mounting connector for the NP-1B.

2

Use the mounting screws to mount the battery case.

3

Tighten the screw for the power supply contact.

4

Insert the top of the cover in the direction of the arrow.

5

Align the hole in the bottom of the cover (metal part) with the
hole in the bottom of the battery case, and attach using the
screw provided with mounting connector for NP-1B.