Panasonic AG-HVX200 Betriebsanweisung

Press the MENU button and select META DATA 
→

 PROPERTY → USER CLIP NAME to select 

the recording method. Two options are available: 
TYPE1and TYPE2.

●

TYPE1

●

TYPE2

∗ The COUNT value is indicated as a four-digit 

number.

  The COUNT value is incremented each time a 

new clip is captured if clip metadata has been 
read in and TYPE2 has been selected as the 
recording method.

  The COUNT value can be reset using the 

following procedure.

  Press the MENU button and select META DATA 

→

 PROPERTY → USER CLIP NAME to display 

the menu shown below. Select “COUNT RESET” 
with the cursor and press the SET button to reset 
the COUNT value to 1.

Uploaded data

Same as GLOBAL CLIP 
ID (UMID data)

Uploaded data + COUNT 
value*

Same as CLIP NAME

When a P2 card with a memory capacity of 8 
GB or more is used in this unit and a one-time 
continuous recording exceeds the prescribed 
duration (approx. 5 minutes for DVCPRO HD, 
approx. 10 minutes for DVCPRO50 or approx. 20 
minutes for DVCPRO or DV) or when a one-time 
recording extends over more than one P2 card, 
the recording concerned will automatically be 
undertaken as a separate clip.
At this time, each clip will be provided with its own 
COUNT value.

If the clip thumbnails are displayed as shown in the 
example above or their properties are indicated 
using a P2 device, the thumbnail and COUNT 
value of clip 1 will be displayed.

Recording duration = Approx. 15 min.

Clip 1
COUNT value 
= 0001

Clip 2
COUNT value 
= 0002

Clip 1
COUNT value 
= 0003

Clip 2
COUNT value 
= 0004

10 min.

5 min.

1st card

2nd card