Panasonic AG-HVX200 Betriebsanweisung

Before using the battery, fully charge it with the AC 
adapter.
Keep a spare battery with you.

the AC adapter, place it flat, and slide it in 
the direction shown below.
•  You cannot charge the battery if the DC cord 

is connected to the DC OUT connector, so 
disconnect it first.

•  The POWER lamp and CHARGE lamp on the 

AC adapter light, and charging begins.

•  If the CHARGE lamp does not light when 

attached, detach the battery and then attach it 
again.

Approx. 330 min.

Approx. 140 min.

•  The times given above are approximate for when 

scenes are shot in the DVCPRO HD mode on a 
P2 card while using the viewfinder.

•  The times apply when the ambient operating 

temperature is 68°F (20°C) and humidity is 60%.

  Charging may take longer at other temperatures 

and humidity levels.

•  The battery becomes hot while it is being used 

or charged. The camera-recorder itself also 
becomes hot during use.

•  The recordable time reduces if you repeatedly 

start and stop recording.

•  Discharge the battery before storing it. When 

storing it for an extended time, charge it at least 
once a year, use up its charge in the camera-
recorder, and then store it again.

•  If the battery is extremely hot or cold, the 

CHARGE lamp will blink several times before 
charging starts.

•  If the CHARGE lamp continues to blink even 

when the battery temperature is normal, there 
may be something wrong with the battery or AC 
adapter. Contact your dealer.

•  The battery takes longer to charge when it is 

warm.

•  The AC adapter can interfere with radio reception 

so keep radios at least 1 meter away from it.

•  The AC adapter may make some noise when you 

are using it, but this is normal.

•  You cannot charge the battery when supplying 

power to the camera-recorder from the AC 
adapter.

•  Operation of battery pack CGR-D16 (1600mAh) 

(sold separately) is not guaranteed.