Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Panasonic
  4. AG-HVX200
  5. Betriebsanweisung

Panasonic AG-HVX200 Betriebsanweisung

Download
Seite von 134
Shooting
25
Basic shooting operations (P2 card)
AUTO
MANUAL
2 
3 
1 
CAMERA
MCR
VCR
DUB
PC
ON
LCD side
Mode button
Mode lamp
REC CHECK 
button
Handle START/STOP 
button
Lock 
release
P2
Shooting in auto mode
1
  Turn the POWER switch to ON. (Page 20)
•  Check that the mode lamp (CAMERA) is 
lighted red. If not, press the mode button.
2
  Switch the AUTO/MANUAL switch to AUTO 
to select auto mode.
•  “A” appears on the viewfinder and LCD 
screens.
•  The focus, gain, iris and white balance are 
adjusted automatically.
3
  Press the START/STOP button (Red) on the 
POWER switch to start shooting.
•  Press again to return to the camera to the 
shooting standby mode. 
•  Use the handle START/STOP button to make 
it easier to shoot from low angles.
Preparing to shoot using a P2 card
1
  Switch the MEDIA switch to “P2”.
2
  Set the POWER switch to ON. (Page 20)
3
  Lift up the viewfinder and open the card slot 
cover.
4
  Insert the P2 card securely in the card slot.
•  There are two card slots.
•  Be absolutely sure to close the card slot 
covers to keep the dust out.
3
4
1
P2
TAPE
ON
2
Do not operate the MEDIA switch when the power 
is switched ON.
If you attempt to operate the MEDIA switch, the 
message “TURN POWER OFF” will be displayed.
In this case, switch OFF the power, and then switch 
it ON again.
Lock 
release