Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Panasonic
  4. AG-HVX200
  5. Betriebsanweisung

Panasonic AG-HVX200 Betriebsanweisung

Download
Seite von 134
32
Using SD memory cards
You can use SD memory cards to save and load 
SCENE files and USER files. (Page 56)
Installing and removing the SD 
memory card
Installation
1
  Open the cover, and insert the card while 
making sure it is oriented in the proper 
direction.
LOCK
2
  Close the cover.
Removal
1
  Open the cover, and check that the access 
lamp is not lit.
2
  Press the card further into the unit, grasp 
the card, and then remove.
3
  Close the cover.
Formatting SD memory card
1
  Switch the MEDIA switch to “P2”.
2
  Set the POWER switch to ON. (Page 20)
3
  Press the mode button and set it to MCR 
mode (the MCR/VCR lamp lights).
4
  Press the MENU button.
5
  On the menu, select OPERATION, FORMAT 
and then SD CARD. (Page 69)
•  Select EXIT to cancel the formatting.
6
  Select YES on the confirmation screen.
•  The selected SD memory card is formatted.
You can also format from the SD CARD FORMAT 
option on the CARD FUNCTIONS screen. (Page 
114)
Cautions in using SD memory cards
•  SD memory cards used with the AG-HVX200 
should conform to SD standards. Be sure to 
format cards using the AG-HVX200.
  To format SD memory cards using a personal 
computer, download the dedicated software from 
the support site.
  SD memory cards with the following capacity 
(8MB - 1GB) can be used for the AG-HVX200:
For the latest information not available in the 
Operating Instructions, visit the P2 Support Desk 
at the following Web sites.
 https://eww.pavc.panasonic.co.jp/pro-av/
•  SD memory cards must not be used or stored in 
an environment where they may be
  Exposed to high temperatures/humidities;
  Exposed to water droplets; or
 Electrically charged.
•  Be sure always close the cover when using an 
SD memory card.
•  You cannot use the SD memory card in the TAPE 
mode.
TAPE
8 MB
16 MB
32 MB
64 MB 128 MB
256 MB 512 MB
1 GB
2 GB
Access lamp