Panasonic AG-HVX200 Betriebsanweisung

•  In the VCR mode, the recording standby 

status is established when these two buttons 
are pressed together in the playback pause 
status. (The recording standby status will not 
be established in the MCR mode.) Each time 
you press the   button, the status switches 
between recording and recording standby.

•  On this unit, press the   button.

•  On this unit, press the   button.

•  In the case of tape, the audio when you perform 

digital dubbing will be recorded in the same audio 
mode as that on the playback side, regardless of 
the menu setting on the recording side.

  In the case of the P2 card, the DV format is 

converted into 48K/2CH or 4CH. In the case of 
1080i and 720P, channels 1 to 4 are recorded 
directly, and channels 5 to 8 are not recorded.

•  If you have set 1394 TC REGEN or 1394 UB 

REGEN to on in the recording unit’s menus you 
can copy the time code and user information from 
the playback source. (Pages 107 and 108)

  Do not start recording until you can see the 

images on the recording unit’s screen. Time 
code and user information may not be correctly 
recorded if you start recording before the images 
are received.

You can record images you have shot on this unit 
to an S-VHS (VHS) tape in a video deck.
•  Use the MEDIA switch to select the P2 card or 

tape ahead of time. (Pages 25 and 29)

VCR

DUB

MCR

PC

CAMERA

When video recording is completed, stop the video 
recording device.
To stop playback, press the   button.