Panasonic AG-DVX100 Betriebsanweisung

The sound track to be recorded when shooting can be 
changed by CH1 SELECT switch and CH2 SELECT 
switch. 
The sound track to be recorded when dubbing can be 
changed at A DUB INPUT ITEM on the AV IN/OUT 
SETUP screen. 

(Page 75). 

Use the AUDIO control to adjust the recording level 
of audio signals input from the built-in microphone 
or INPUT 1/2 terminal.
You cannot adjust the audio signals input into the 
AUDIO IN/OUT CH1/CH2 terminals.

Switch between the sound that has been dubbed 
and the sound heard during shooting in the setup 
menus, PLAYBACK FUNCTIONS screen, 32K 
(12bit) AUDIO. (Page 73)
ST1: 

The sound recorded during shooting is played 
back. 

The sound that has been dubbed is played back. 

Both the sound recorded during shooting and that 
you have dubbed are played back. 

You can monitor the sound by setting “ST2”. 
If you use headphones when performing audio 
dubbing on a recording using microphone input, 
you can listen to the sound being dubbed. 
When you perform audio dubbing using line input 
(from the audio component connected to the 
AUDIO IN/OUT jack), you can listen to the sound 
being dubbed through the speakers. 

(1)First reset the counter memory display in the 

memory stop mode at the position where the 
audio dubbing is to end. (Page 57)

(2)Rewind the tape to the position where the audio 

dubbing is to start, and start the dubbing. 

(3)The tape then stops automatically at the position 

where the counter memory display was reset. 

Built-in microphone L 

channel

CH1

CH3

Built-in microphone R 

channel

CH2

CH4

INPUT 1 (XLR)

CH1

CH3

INPUT 2 (XLR)

CH2 (CH1)

CH4 (CH3)

AUDIO IN/OUT CH1 

(Pin jack)

-

CH3

AUDIO IN/OUT CH2 

(Pin jack)

-

CH4