Panasonic AG-HMC150 Betriebsanweisung

Seite von 112
24
This camera has two viewfinders; one is a 
miniature LCD in the viewfinder and the other is a 
retractable 3.5-inch LCD.
Use the viewfinder that best suits the application 
and shooting conditions.
The brightness and hue may differ between the 
images appearing on the viewfinder and LCD 
monitor and those displayed on a TV monitor. To 
see how the final images will appear, check them 
on a TV monitor.
Using the viewfinder
1
  Set the POWER switch to ON and check that 
images appear in the viewfinder.
POWER
ON
OFF
2
  Adjust the viewfinder’s angle so that the 
screen is positioned where it is easiest to 
see.
You can move the viewfinder out to about 
90° perpendicular to the camera.
3
  Adjust the diopter adjustment dial so 
that you can see the characters on the 
viewfinder screen clearly.
Diopter adjustment dial
Eye piece
Do not allow the eyepiece of the viewfinder 
to remain in direct contact with sunlight or 
other strong light sources.
Internal components may be damaged and fire 
may be caused if light accumulates through 
the lens.
Viewfinder
Fitting the eye cup
Attach the eye cup by aligning the projections on 
the eye cup holder and eye cup and fitting them 
together.
Turning the eye cup after attaching it may 
cause the eye cup holder to come off. If the 
eyecup holder does come off, see “Cleaning 
the Viewfinder” (Page 106) for details on how 
to refit it.
Eye cup holder
Eye cup
Projections