Panasonic AG-HMC70 Betriebsanweisung

Seite von 124
With other products
80
1
Connect this unit and a TV with the HDMI cable (optional).
Use a HDMI cable (optional) A with the logo shown above.
2
Set the mode dial to 
 to turn on the power.
3
Select the input channel on the TV.
Example: Select the [HDMI] channel etc.
(The name of the channel may differ depending on the connected TV.)
4
Start playback on this unit.
The image and audio are output on the TV.
ª If the image or audio from this unit is not output on the TV
≥Check that the plugs are inserted as far as they go.
≥Check the connected terminal.
Check the input setting (input switch) and the audio input setting on the TV. (For more 
information, please read the operating instructions for the TV.)
Check [HDMI RESOLUTION]. (
ª Fitting of the ferrite core
When an HDMI cable is connected to this camera, fit 
the supplied ferrite core to the cable as close to the 
camera as possible.
≥Unhook the two tabs on the ferrite core to open it. 
Insert the HDMI cable into the ferrite core and close 
it.
A Ferrite core (supplied)
B Tab
C HDMI cable (optional)
Connecting with a HDMI cable (optional)
What is HDMI?
HDMI is the next-generation interface for digital devices. When this unit is connected to a HDMI 
compatible device, the image and audio can be output with a digital signal. If you connect this unit 
and a HDMI compatible high definition TV and then play back the recorded high definition images 
(l 14), you can enjoy them in high resolution with high quality sound.
HDMI IN
VQT1Q93_ENG_PP.book  80 ページ  2008年3月6日 木曜日 午後5時42分