Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Panasonic
  4. AG-HPX170
  5. Betriebsanweisung

Panasonic AG-HPX170 Betriebsanweisung

Download
Seite von 128
Shooting
Basic shooting operations
Preparing to shoot
1
  Set the POWER switch to ON. (Page 19)
  Lift up the viewfinder, press the side of the 
card slot cover (A), and slide the cover (B) 
to open it.
  Insert the P card securely in the card slot.
  Push the P2 card eject button to the 
direction of the arrow, and close the card 
slot cover.
There are two card slots.
Be absolutely sure to close the card slot 
covers to keep the dust out.
Do not remove the P2 card while the P2 card 
access lamps are blinking orange. (Page 26)
3
4
1
POWER
ON
OFF
Lock 
release
Shooting in auto mode
1
  Turn the POWER switch to ON. (Page 19)
Check that the mode lamp (CAM) is lighted 
red.
  Switch the AUTO/MANUAL switch to AUTO 
to select auto mode.
“ 
A
 ” appears on the viewfinder and LCD 
screens.
The focus, gain, iris and white balance are 
adjusted automatically.
•
•
•
•
•
•
  Press the START/STOP button (Red) on the 
POWER switch to start shooting.
Press again to return to the camera to the 
shooting standby mode.
Use the handle START/STOP button to make 
it easier to shoot from low angles.
1
2
3
POWER
ON
OFF
POWER
ON
OFF
AUTO MANUAL
Mode button
Mode lamp
Lock release
LCD 
side
Handle START/STOP 
button
REC CHECK 
button
Under the following circumstances, even if you 
press the STOP button it may take some time 
until the writing to the P2 card finishes. For this 
reason, the operation will not be acknowledged 
if you press the START button too soon.
Stopped after only a short recording time
Stopped immediately after the recording has 
moved to a second P2 card
•
•
•
•
Shooting