Panasonic AG-HPX500 Betriebsanweisung

Use this switch to select the audio channel whose signals are output to the speakers, earphones or AUDIO 
OUT connector.
CH1/2: Signals on Audio Channels 1 and 2 are output.
CH3/4: Signals on Audio Channels 3 and 4 are output.
The channel indications on the display window and on the audio level meter in the viewfinder are 
synchronised with this selector switch.

In combination with the MONITOR SELECT CH1/2 / CH3/4 switch, select the audio signal output to the 
speakers and earphones, and from the AUDIO OUT connector.

MONITOR SELECT

CH1/3

Audio Channel 1

Audio Channel 3

ST

Stereo signals from  

Audio Channels 1 and 2

Stereo signals from  

Audio Channels 3 and 4

CH2/4

Audio Channel 2

Audio Channel 4

Used to control the volume of sound output from the monitor speakers and earphones.
It also adjusts the alarm sound volume. 

The speakers output EE sound during recording, and reproduced sound during playback. The speakers emit 
an alarm sound when the warning lamp blinks and/or the indicator activates. EE sound and playback sound 
are not output during alarm sound output. 
When the PHONES jack is connected with earphones, sound from the speaker is automatically muted.

This connector is designed for audio monitoring (stereo) earphones. When earphones are connected, sound 
from the speakers is automatically muted.

This output socket is designed for 12-VDC. It provides a maximum current of 1.5 A.

•  This connector outputs audio signals recorded on Channels 1/2 or 3/4.
•  Output signals are selected with the MONITOR SELECT CH1/2 / CH3/4 selector switch.