Panasonic AJ-HPX2000 Benutzerhandbuch

25

Parts and their Functions

：Display Window Functions

 P

a

rts and

 thei

r Fu
ncti

on
s

Display Window Functions

P2 card/battery-remaining level indications

Memory action status indication

Battery-remaining level indication bar
For a battery with a digital indicator (percentage indication), if the 
remaining level of the battery is higher than 70%, all seven 
segments up to the “F” position are lit.
When the remaining level falls below 70%, the segments go out 
one-by-one for each drop of 10%. All seven segments can be set 
to light up when the battery-remaining balance is 100%. To do so 
select “100%” for the menu option BATT REMAIN FULL in the 
<BATTERY/P2CARD> screen of the MAIN OPERATION page.

Audio channel level meter
When the MONITOR SELECT CH1/2 / CH3/4 switch is set to 
[CH1/2], the meter indicates 1 and 2 as the audio channel 
numbers, together with their audio levels. When the switch is 
set to [CH3/4], the meter indicates 3 and 4 as the audio 
channel numbers, together with their audio levels. 

Media-remaining space indication bar
The bar indicates the remaining free space on each P2 card, 
using a seven-segment display.
Each segment can represent either three or five minutes of 
remaining free space, depending on the value set through the 
menu option CARD REMAIN/

„

. According to the set value, the 

segments disappear one-by-one. The menu option CARD 
REMAIN /

„

 can be found in the <BATTERY/P2CARD> screen 

on the MAIN OPERATION page.   

Stays illuminated in LOOP REC mode. For information
about the LOOP REC mode, see [

(page 36).

OP-SLOT: Remains illuminated when a video encoder card is

operated in the optional slot.

Stays illuminated when the camera-recorder operates
in SD mode (480-59.94i, 576-50i) and is set to 16:9
mode.

Stays illuminated when the camera-recorder is in HD
mode (1080i, 720P).

Stays illuminated when the recording/playback format
is DV.

Stays illuminated when radio waves are not received
during GPS operation. 

: Stays illuminated when radio waves are received

during GPS operation. 

P-REC: Stays illuminated when the PRE REC MODE is set to

ON, and blinks when recording is continued after the
recording tally lamp has gone out.

Remains illuminated during INTERVAL REC mode
recording, and blinks during a pause.

Blinks when INTERVAL REC mode is selected.

Stays illuminated when the time code is in non-drop
frame mode.

Stays illuminated when the time code is in drop frame
mode.

SLAVE: Stays illuminated when the time code is externally

locked.

HOLD: Stays illuminated when the time code generator/reader

value is frozen.

Stays illuminated when the DISPLAY switch is
positioned at [CTL] to display the CTL count.

Stays illuminated when the DISPLAY switch is
positioned at [TC] (or [UB]) to display the TC (or UB)
generator value.

Stays illuminated when the DISPLAY switch is positioned at
[TC] (or [UB]) to display the TC (or UB) reader value.

VTCG: Stays illuminated when the DISPLAY switch is

positioned at [UB] to display the VIUB generator value.

Stays illuminated when the DISPLAY switch is
positioned at [UB] to display the VIUB reader value.

TIME: Stays illuminated when the DISPLAY switch is positioned at

[UB] to display the real-time hour, minute and second.

DATE: Stays illuminated when the DISPLAY switch is

positioned at [UB] to display the real-time date.

The CTL, VTCG, TIME, and DATE stay off when the DISPLAY
switch is positioned at [UB] to display real time, time zone,
hour and minute.

The time code, CTL, user bits and real time are shown.

‹

When the DISPLAY switch is positioned at UB, each press of the 
HOLD button changes the indication through VTCG (VTC) 

>

 DATE 

>

 TIME 

>

 No Indication (Time Zone) 

>

 TCG (TC), in that order. 

AJ-HPX2000P(VQT1D27-1)E.book  25 ページ  ２００７年７月３０日　月曜日　午後１時３１分