Panasonic aj-sdx900 Benutzerhandbuch
15
Chapter 2 Parts and their functions
2
5
1
2
4
3
6
2-6
Warning/status display
section
section
2-7
Display window and its
displays
displays
Remaining tape and remaining battery charge
and audio channel level displays
and audio channel level displays
Displays relating to the VTR unit’s operations
and modes
and modes
CTL
RF SERVO HUMID SLACK
h
TAPE
E
B
Y
minM
s
frm
13
24
0
D
VTCG TIME DATE P-iREC
SLAVE HOLD W
GPS
BATT
E
F
OVER
OVER
10
OO
40
-dB
30
20
NDF
Remaining tape display
The remaining tape time is displayed using 7 segments.
The remaining tape time indicated by each segment is set to 3 minutes or 5
minutes using TAPE REMAIN/∫ on the VTR MENU “BATTERY/TAPE”
screen. Each time the number of minutes set for the segments elapses, one
segment is cleared.
The remaining tape time indicated by each segment is set to 3 minutes or 5
minutes using TAPE REMAIN/∫ on the VTR MENU “BATTERY/TAPE”
screen. Each time the number of minutes set for the segments elapses, one
segment is cleared.
Remaining battery charge display
If a battery with a digital display (% display) is used, all 7 segments up
to the “F” position light when the 70% or more of the battery charge
remains.
When there is less than 70% of the battery charge remaining, the
segments go out one by one in sequence every time the remaining
charge drops by 10%. It is also possible to set all 7 segments to light at
a 100% battery charge by selecting 100% as the setting for BATT
REMAIN FULL on the <BATTERY/TAPE> screen of the VTR menu.
to the “F” position light when the 70% or more of the battery charge
remains.
When there is less than 70% of the battery charge remaining, the
segments go out one by one in sequence every time the remaining
charge drops by 10%. It is also possible to set all 7 segments to light at
a 100% battery charge by selecting 100% as the setting for BATT
REMAIN FULL on the <BATTERY/TAPE> screen of the VTR menu.
Audio channel level meter
When the MONITOR SELECT CH1/2 / CH3/4 switch is set to CH1/2,
numbers 1 and 2 indicating the audio channels appear, and the CH1
and CH2 audio levels are displayed. Conversely, when it is set to
CH3/4, numbers 3 and 4 indicating the audio channels appear, and
the CH3 and CH4 audio levels are displayed.
numbers 1 and 2 indicating the audio channels appear, and the CH1
and CH2 audio levels are displayed. Conversely, when it is set to
CH3/4, numbers 3 and 4 indicating the audio channels appear, and
the CH3 and CH4 audio levels are displayed.
1
Back tally lamp
When the back tally switch 2 is set to ON, this lamp
serves the same function as the front tally lamp in the
viewfinder.
serves the same function as the front tally lamp in the
viewfinder.
3
WARNING lamp
When a problem of some form or other occurs within the
VTR unit, this lamp flashes or lights.
VTR unit, this lamp flashes or lights.
2
Back tally switch
This is used to control the unit’s back tally lamp 1 and
rear tally lamp 6.
rear tally lamp 6.
ON: The back tally lamp and rear tally lamp operate.
OFF: The back tally lamp and rear tally lamp do not
OFF: The back tally lamp and rear tally lamp do not
operate.
4
LIGHT switch
This controls the lighting of the display window.
Each time is it pressed, the lighting of the display window
5 is set in turn from on to off or vice versa.
Each time is it pressed, the lighting of the display window
5 is set in turn from on to off or vice versa.
5
Display window
This displays the alarms, remaining battery charge, audio
levels, time data, etc. relating to the VTR unit.
levels, time data, etc. relating to the VTR unit.
6
REAR TALLY lamp
When the BACK TALLY switch is set to ON, this lamp
operates in exactly the same way as the back tally lamp.
operates in exactly the same way as the back tally lamp.
CTL
RF SERVO HUMID SLACK
h
TAPE
E
B
Y
minM
s
frm
13
24
0
D
VTCG TIME DATE P-iREC
SLAVE HOLD W
GPS
BATT
E
F
OVER
OVER
10
OO
40
-dB
30
20
NDF
Error code display (for details, refer to “6-3 Warning
system”)
system”)
Warning displays
RF:
Clogged video head
SERVO: Servo disturbance
HUMID: Formation of condensation on the head drum
SLACK: Problem in tape take-up
HUMID: Formation of condensation on the head drum
SLACK: Problem in tape take-up
For details, refer to “6-3 Warning system.”