Panasonic aj-sdx900 Benutzerhandbuch
9
Chapter 2 Parts and their functions
2
2-2
Audio function section (input system)
1
2
3
5
6
7
9
; :
<
=
>
?
@
4
8
1
MIC IN (microphone input) jack (XLR, 3-pin)
Connect the microphone (optional accessory) here. The
power for the microphone is supplied from this jack.
It is possible to use a stereo microphone; however, this
jack will need to be converted to a stereo microphone jack,
so please consult your dealer or a service center specified
by your dealer.
power for the microphone is supplied from this jack.
It is possible to use a stereo microphone; however, this
jack will need to be converted to a stereo microphone jack,
so please consult your dealer or a service center specified
by your dealer.
3
AUDIO SELECT CH1/CH2 (audio channel 1 &
2 automatic/manual level adjustment
selector) switch
2 automatic/manual level adjustment
selector) switch
This is used to select the method for adjusting the
recording levels of audio channels 1 and 2.
recording levels of audio channels 1 and 2.
AUTO: Set here for automatic adjustment.
MAN: Set here for manual adjustment.
MAN: Set here for manual adjustment.
2
AUDIO LEVEL CH1/CH2 (audio channel 1 & 2
recording level adjustment) controls
recording level adjustment) controls
When the AUDIO SELECT CH1/CH2 switch 3 is set to
MAN, the recording level of audio channels 1 and 2 can be
adjusted using these controls.
The controls come with a locking mechanism. Therefore,
to adjust the recording level, simultaneously push in and
turn the controls.
MAN, the recording level of audio channels 1 and 2 can be
adjusted using these controls.
The controls come with a locking mechanism. Therefore,
to adjust the recording level, simultaneously push in and
turn the controls.
4
AUDIO IN (audio input selector) switch
These are used to select the input signals to be recorded
on audio channels 1, 2, 3 and 4.
on audio channels 1, 2, 3 and 4.
FRONT:
The input signals supplied from the
microphone which has been connected
to the MIC IN jack 1 are recorded.
microphone which has been connected
to the MIC IN jack 1 are recorded.
W.L. (wireless): The input signals from the slot-in
wireless microphone receiver are
recorded.
recorded.
REAR:
The audio input signals supplied from
the audio component which has been
connected to the AUDIO IN CH1/CH2
connectors 5 are recorded.
the audio component which has been
connected to the AUDIO IN CH1/CH2
connectors 5 are recorded.
5
AUDIO IN CH1/CH2 (audio input channel 1 &
2) connectors (XLR, 3-pin)
2) connectors (XLR, 3-pin)
An audio component or microphones are connected here.
6
LINE/MIC/+48V (line input/mic input/mic
input + 48V) selector switch
input + 48V) selector switch
This is used to switch the audio input signals from the
audio component which has been connected to the AUDIO
IN CH1/CH2 connectors 5.
audio component which has been connected to the AUDIO
IN CH1/CH2 connectors 5.
LINE: The audio input signals from the audio component
serving as the line input are selected.
MIC: The audio input signals from the internal power
supply type of microphone are selected. (The
phantom mic power is not supplied from the unit.)
phantom mic power is not supplied from the unit.)
+48V: The audio input signals from the external power
supply type of microphone are selected. (The
phantom mic power is supplied from the unit.)
phantom mic power is supplied from the unit.)
7
Wireless receiver slot
The UniSlot® wireless receiver (optional accessory) can
be attached here.
be attached here.
8
FRONT AUDIO LEVEL (audio recording level
adjustment) control
adjustment) control
This enables the recording level of audio channels 1 and 2
to be adjusted. This level can be adjusted regardless of
the setting position of the AUDIO SELECT switch.
When the <MIC/AUDIO1> screen is opened from the VTR
MENU page by performing a menu operation, whether to
enable or disable the operation of this level control can be
set using the FRONT VR CH1 and FRONT VR CH2
setting items.
to be adjusted. This level can be adjusted regardless of
the setting position of the AUDIO SELECT switch.
When the <MIC/AUDIO1> screen is opened from the VTR
MENU page by performing a menu operation, whether to
enable or disable the operation of this level control can be
set using the FRONT VR CH1 and FRONT VR CH2
setting items.