Panasonic aj-sdx900 Benutzerhandbuch
98
Chapter 7 Menu description tables
The underlining in the variable range column indicates the setting in the preset mode.
Item
Variable
range
Remarks
7-8-7
TC/UB
Item
Variable
range
Remarks
UB MODE
USER
TIME
DATE
EXT
TCG
FRM RATE
REGEN
TIME
DATE
EXT
TCG
FRM RATE
REGEN
For selecting the UB mode.
USER:
USER:
Selects the UB value set in the
LCD section.
LCD section.
TIME:
Selects the local time (hour,
minute, second).
minute, second).
DATE:
Selects the local date and time
(last 2 digits of year, month, date,
hour)
(last 2 digits of year, month, date,
hour)
EXT:
Sets the UB from the TC-IN as the
slave. The user value is retained if
no value can be read.)
slave. The user value is retained if
no value can be read.)
TCG:
Inputs the TCG value unchanged.
FRM RATE: Selects the same camera shooting
data (frame rate, etc.) as the
VAUX UB (VITC UB).
VAUX UB (VITC UB).
REGEN:
Reads the value recorded on the
tape and then continues to record
from that value.
tape and then continues to record
from that value.
TCG SET HOLD
ON
OFF
OFF
For selecting ON or OFF for the function that
without fail uses what was previously set as
the TCG value for recording when the TCG
value had been set before the power was
turned off and recording was then performed
after the power was turned back on again.
without fail uses what was previously set as
the TCG value for recording when the TCG
value had been set before the power was
turned off and recording was then performed
after the power was turned back on again.
FIRST REC TC
REGEN
PRESET
PRESET
For selecting whether or not to regenerate the
time code as the value on the tape during the
first recording after the power was turned on,
the cassette was inserted or a playback or
search operation was performed.
<Note>
When the unit is operated in the 24P or 24PA
mode, the time code cannot be regenerated
to the value on a tape recorded in the drop
frame mode.
time code as the value on the tape during the
first recording after the power was turned on,
the cassette was inserted or a playback or
search operation was performed.
<Note>
When the unit is operated in the 24P or 24PA
mode, the time code cannot be regenerated
to the value on a tape recorded in the drop
frame mode.
P.OFF LCD
DISPLAY
DISPLAY
ON
OFF
OFF
For selecting whether or not to set the LCD’s
time code and display its count while the
power is off.
ON:
time code and display its count while the
power is off.
ON:
The time code can be set and
displayed even while the power is off.
displayed even while the power is off.
OFF: While the power is off, the power to the
LCD section is turned off, and the time
code can be neither set nor displayed.
code can be neither set nor displayed.
TC OUT
TCG
TCG/TCR
TCG/TCR
For selecting the TC OUT output.
TCG:
TCG:
The time code generator value is
always output.
always output.
TCG/TCR: The time code generator value is
output with the E-E setting and the
time code reader value is output with
the V-V setting.
time code reader value is output with
the V-V setting.
TC MODE
DF
NDF
NDF
For selecting the TC mode.
DF:
DF:
Drop frame
NDF: Non-drop frame
VITC UB MODE
USER/EXT
TIME
DATE
TCG
FRM RATE
REGEN
TIME
DATE
TCG
FRM RATE
REGEN
For selecting the VAUX TC (VITC) UB mode.
USER/EXT:
USER/EXT:
When EXT is selected as the UB MODE
setting, the value concerned applies; with
any other setting, the USER value set by
UB is recorded.
setting, the value concerned applies; with
any other setting, the USER value set by
UB is recorded.
TIME: The local time (in hours, minutes and
seconds) is selected.
DATE:
The local date (last 2 digits of AD
year, month, day and hours) is
selected.
year, month, day and hours) is
selected.
TCG:
The TCG value is used as is for UB.
FRM RATE:
The same shooting information (frame
rate, etc.) of the camera as for VAUX UB
(VITC UB) is selected.
rate, etc.) of the camera as for VAUX UB
(VITC UB) is selected.
REGEN: The value recorded on the tape is
read and recorded continuously.
<Note>
When the unit is operated in the 24P or 24PA
mode, this item is fixed at the FRM RATE
setting. For details, refer to the 24P VITC UB
item on the <OPTION> screen.
When the unit is operated in the 24P or 24PA
mode, this item is fixed at the FRM RATE
setting. For details, refer to the 24P VITC UB
item on the <OPTION> screen.
TC DISP SEL
30F
24F
24F
For selecting the display format to be used for
the frame digits of the time code.
30F: A number up to 30 frames is indicated in
the frame digits of the time code.
30F: A number up to 30 frames is indicated in
frame digits of the time code.
24F: A number up to 24 frames is indicated in
frame digits of the time code.
7-8-6
MIC/AUDIO2
WIRELESS WARN
ON
OFF
OFF
For selecting whether or not to output
warnings when the reception of the wireless
receiver is poor.
warnings when the reception of the wireless
receiver is poor.
Item
Variable
range
Remarks
FRONT MIC
POWER
POWER
ON
OFF
OFF
For selecting the phantom power supply for
the front microphone.
the front microphone.
REAR MIC POWER
ON
OFF
OFF
For selecting the phantom power supply for
the rear microphone.
the rear microphone.
AUDIO OUT
ON
OFF
OFF
For setting the audio output circuit.
OFF: The power to the output circuit is shut
OFF: The power to the output circuit is shut
down, and the signals of the circuit are
not output.
not output.
ON:
The signals of the audio output circuit
are output.
are output.
MONITOR SELECT
STEREO
MIX
MIX
For selecting the format of the signals to be
output to the monitor.
output to the monitor.
FRONT MIC LEVEL
–40dB
–50dB
–50dB
For selecting the input level of the front
microphone.
microphone.
REAR MIC CH1
LVL
LVL
–50dB
–60dB
–60dB
For selecting the input level of the rear
microphone.
microphone.
REAR MIC CH2
LVL
LVL
–50dB
–60dB
–60dB
For selecting the input level of the rear
microphone.
microphone.
REAR LINE IN LVL
0dB
+4dB
+4dB
For selecting the rear line input level.
AUDIO OUT LVL
0dB
+4dB
+4dB
For selecting the rear audio output level.
HEADROOM
18dB
20dB
20dB
For setting the headroom (reference level).