Panasonic aj-spc700 Benutzerhandbuch
25
3
Chapter 3 Recording and Playback
(continued)
Shooting
White/Black Balance Adjustment to Recording
Completion
Completion
For shooting, follow the steps below.
1
Select a filter according to light conditions.
2A
When the white balance is saved:
Position the WHITE BAL switch to [A] or [B].
2B
When the white or black balance is not saved and
you have no time to adjust the white balance:
you have no time to adjust the white balance:
Position the WHITE BAL switch to [PRST].
This adjusts the white balance against the filter
according to the position of the FILTER control.
This adjusts the white balance against the filter
according to the position of the FILTER control.
2C
If the white balance is adjusted on the spot:
Select a filter according to light conditions. Then,
position the WHITE BAL switch to [A] or [B] and shoot a
white test subject so that it appears at the center of the
screen. Then, follow the steps below to adjust the white
balance.
position the WHITE BAL switch to [A] or [B] and shoot a
white test subject so that it appears at the center of the
screen. Then, follow the steps below to adjust the white
balance.
1. Press the AUTO W/B BAL switch toward [AWB] to
adjust the white balance.
2. Press the AUTO W/B BAL switch toward [ABB] to
adjust the black balance.
3. Press the AUTO W/B BAL switch toward [AWB] to
adjust the white balance again.
For directions on making adjustments, see [4-1-1
Adjusting the White Balance] and [4-1-2 Adjusting the
Black Balance].
Adjusting the White Balance] and [4-1-2 Adjusting the
Black Balance].
3
Point the camera at your subject to adjust the focus,
and zoom.
and zoom.
4
To use the electronic shutter, set the shutter speed and
operation mode.
For more information, see [4-2 Setting the Electronic
Shutter].
operation mode.
For more information, see [4-2 Setting the Electronic
Shutter].
5
Press either the REC START/STOP button, REC button
on the handle or VTR button at the lens to start
recording.
During recording, the REC lamp in the viewfinder stays
illuminated.
on the handle or VTR button at the lens to start
recording.
During recording, the REC lamp in the viewfinder stays
illuminated.
6
To stop recording, press either the REC START/STOP
button, REC button on the handle or VTR button at the
lens.
The REC lamp in the viewfinder goes out.
button, REC button on the handle or VTR button at the
lens.
The REC lamp in the viewfinder goes out.
White/Black balance adjustment to recording completion
Operation Buttons
During recording, all operation buttons (REW, FF, PLAY/
PAUSE, STOP) are disabled.
PAUSE, STOP) are disabled.
1
3
2A, B, C
2C
4 5, 6
#,52%2
'PINKUJDQQMࡍࠫ㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ