Panasonic aj-spc700 Benutzerhandbuch

75

To detach the shoulder strap, first open the hooks, then
detach the strap. 

Make sure that the shoulder strap is securely attached. 

Some functions can be remote-controlled when the AJ-
EC3P extension control unit (optional) is connected to the
camera. 
When the AJ-EC3P is connected, the camera automatically
enters remote control mode after the power switches of both
the camera and the AJ-EC3P are turned ON. 

z Be sure to turn OFF both the camera and the AJ-EC3P

power switches before connecting or disconnecting the
controller cable. 

z If ECU DATA SAVE is set to OFF, the camera-related

setting values, which have been adjusted or set using the
AJ-EC3P, will be cancelled when the camera power switch
is turned OFF. Also, the setting values cannot be written to
an SD memory card. However, the menu settings
performed using the AJ-EC3P can be written to an SD
memory card. Next time the AJ-EC3P is connected, the
setting values will return to the AJ-EC3P settings. 
ECU DATA SAVE can be selected from the <SW MODE>
screen on the CAM OPERATION page. 

z If ECU DATA SAVE is set to ON, the values adjusted or set

using the AJ-EC3P are retained, even after the camera
power switch is turned OFF. 

z The USER switch on the camera does not function when

the AJ-EC3P is connected. 

z When controlling the shutter from the AJ-EC3P, the shutter

speeds correspond to the speeds set by the menu on the
camera, not the speeds written on the AJ-EC3P. The
shutter speeds correspond as follows: 

100 (60)

POSITION1

120

POSITION2

250

POSITION3

500

POSITION4

1000

POSITION5

2000

POSITION6

#,52%2 'PINKUJDQQMࡍ࡯ࠫ㧞㧜㧜㧢ᐕ㧡᦬㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ