Panasonic SV-AV100 Betriebsanweisung

Seite von 100
US
65)
≥[DCIM], [SD_VIDEO] etc. are necessary 
items in the folder structure. They have 
nothing to do with actual operations.
≥The memory capacity indicated on the SD 
Memory Card label corresponds to the 
total amount of the capacity to protect and 
manage the copyright and of the capacity 
available as a conventional memory for a 
SD Video Camera, Personal Computer or 
others.
≥Do not delete any folders located on the 
Memory Card. If this is done, the Memory 
Card may not be recognized on your SD 
Video Camera.
≥The MPEG4 motion image file (ASF 
format) can be played on the Windows 
Media Player 6.4 or later. If it cannot be 
played back, download the appropriate 
software (G.726). (G.726 is installed at the 
same time as the supplied software, 
MediaStage for AV100.)
≥When formatting a Memory Card, format it 
on the SD Video Camera.
≥When a motion image is played back on a 
personal computer, a black belt may be 
present along the top and bottom of the 
picture.
≥If data not supported by the SD Video 
Camera is recorded on a personal 
computer, it cannot be recognized by the 
SD Video Camera.
_ÉÑçêÉ=oÉèìÉëíáåÖ=
pÉêîáÅÉ
Power
1:
The SD Video Camera power cannot 
be turned on.
1-1: Is the power source connected 
correctly?
1-2: Is the Battery fully charged? Charge it 
with the AC Adaptor. 
2:
The SD Video Camera power shuts 
off automatically.
2:
If you do not use the SD Video Camera 
for more than 5 minutes, the power 
shuts off automatically to save the 
Battery power. 
3:
The SD Video Camera power does 
not stay on long enough.
3:
Is the Battery low? Charge the Battery 
or attach a fully charged Battery. 
Battery
1:
Battery runs down quickly.
1-1: Is the Battery fully charged? Charge it 
with the AC Adaptor. 
1-2: Are you using the Battery in an 
extremely cold place? In cold places, 
the operating time of the Battery 
becomes shorter. 
1-3: Has the Battery worn out? If the 
operating time is still short even after 
the Battery is fully charged, the Battery 
has worn out.
Recording
1:
Recording does not start although 
power is supplied to the SD Video 
Camera and the Memory Card is 
correctly inserted.
1-1: Is the SD Video Camera turned on?
1-2: Is the write-protect switch set to 
[LOCK]? Being set to [LOCK], the 
Memory Card cannot be recorded.
1-3: Does the Memory Card have enough 
free space? Check the [Capacity] of a 
card, and when there is little free space 
available, delete unnecessary data in 
the Memory Card. (
51)
AV100PP.book  86 ページ  2003年8月22日 金曜日 午後4時30分