Panasonic hd-ag-3dp1 Benutzerhandbuch

110

Chapter

Men

u

Oper

ations

FILE SELECT

Select the file you wish to use for shooting among six 
scene files.Select number 1 to 6 that corresponds to 
FILE1 to FILE6, respectively.

•  The factory default settings are the 

same for 1 to 6.

LOAD/SAVE/INIT

Loads, saves, and initializes the settings of the scene 
file selected in FILE SELECT.

Loads data stored in camera memory. 

Saves current values in camera memory. 

Returns settings to their factory defaults. 

•  This setting does not affect scene files 

that are not the currently selected one.

VFR

Enables or disables variable frame rate (VFR) mode at 
720P. 

VFR operation

VFR off

•  Available only in 720P system mode. 

(This message does not appear in 
modes other than 720P.)

FRAME RATE

Adjusts the frame rate and exposure time at 720P 
when VFR is on.
•  When 59.94 Hz is selected
12, 15, 18, 20, 21, 22, 24, 25, 26, 27, 28, 30, 32, 34, 
36, 40, 44, 48, 54, 60 FRAME 
•  When 50 Hz is selected
12, 15, 18, 20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 32, 
34, 37, 42, 45, 48, 50 FRAME

•  Available only in 720P system mode 

and when VFR is set to ON. 
(This message does not appear in 
modes other than 720P.)

•  A change to 24 fps may cause the 

screen to flicker momentarily.

(SYNCHRO SCAN)

Displays synchro scan shutter speeds to enable the 
operator to synchronize the camera to computer 
monitors. 
•  This function only displays the shutter speeds. Use 

the SYNCHRO SCAN switch to set a shutter speed.

•  Set values (displayed values) are assigned to the 

current scene file and manipulated using the LOAD, 
SAVE and INIT functions.

For details, refer to [Placing the Camera-recorder in 
SYNCHRO SCAN Mode] (page 49).
•  When 59.94 Hz is selected

•  When 50 Hz is selected

•  Displayed in blue when not set to 

synchro scan mode and when the 
SYNCHRO SCAN switch settings are 
not available.

DETAIL LEVEL

Adjusts the level of image outline correction (in 
horizontal and vertical directions). 

V DETAIL LEVEL

Adjusts the level of correction in vertical direction. 

DETAIL CORING

Adjusts the level of noise reduction of the detail signal. 

•  Adjust towards – for a clearer image. Noise 

increases slightly. 

•  Adjust towards + for less noise. 

CHROMA LEVEL

Adjusts the chroma level. 

CHROMA PHASE

Makes fine adjustments to the chroma phase. 

COLOR TEMP Ach

Makes fine adjustments to the color temperature (after 
Ach white balance adjustment). 

COLOR TEMP Bch

Makes fine adjustments to the color temperature (after 
Bch white balance adjustment). 

____ indicates the factory setting