Panasonic hd-ag-3dp1 Benutzerhandbuch

54

Chapter

4

Adjustments

and

Settings

for

Recording

The convergence point is a point where the optical axes 
of the left and right lenses converge. This indicates the 
reference plane when viewing a 3D image.
When shooting, adjust the convergence point by shooting 
the subject you wish to set on the reference plane so that 
the image of the subject from the left lens is completely 
superimposed onto that from the right lens.
When viewing 3D image, a subject located closer than the 
convergence point is displayed in front of the screen, and 
a subject located farther than the convergence point is 
displayed behind the screen.

PresstheLCD/EVFbuttontosettoMIXmode.

TurntheCONV.dialtoadjusttheconvergence

point.

LCD/EVFbutton

CONV.dial

•  The convergenct position (distance to the 

reference plane) is displayed as “C 00” to “C 99” 
in the center at the lower part of the screen, The 
larger the number, the greater the distance to the 
reference plane. 
Refer to [10 Convergence position display] in 
[Screen displays] (page 69).

•  The “Convergence in Green” display of the 

3D assist function allows you to check the 
convergence point area on the screen. 
 Refer to [3D Assist Function] (page 56).

