Panasonic HDC-HS200 Betriebsanweisung
11
VQT1Y50
Preparation
Before using
1
Handling of HDD (Hard disk drive)
[HDC-HS200]
This unit is equipped with the built-in 80 GB HDD. While the HDD is capable of storing a large amount
of data, there are a few things to look out for. When using this component, pay attention to the following
points.
of data, there are a few things to look out for. When using this component, pay attention to the following
points.
∫ Do not expose the HDD to
vibrations and shocks.
Due to the environment and handling conditions,
the HDD may be subject to partial damages or
may not be able to read, record, and play back
data. Do not expose the unit to vibrations or
shock, and do not turn off the power during
recording or playback.
If the unit is used in a place with loud sounds,
such as a club or venue, the recording may
stop due to sound vibrations. Recording data
on an SD card is recommended in these
places.
the HDD may be subject to partial damages or
may not be able to read, record, and play back
data. Do not expose the unit to vibrations or
shock, and do not turn off the power during
recording or playback.
If the unit is used in a place with loud sounds,
such as a club or venue, the recording may
stop due to sound vibrations. Recording data
on an SD card is recommended in these
places.
∫ Back up data periodically.
The HDD is temporary storage. In order to avoid
erasing data due to static electricity,
electromagnetic waves, breakage, and failures,
back up the data to a PC or DVD disc. (l 103,
erasing data due to static electricity,
electromagnetic waves, breakage, and failures,
back up the data to a PC or DVD disc. (l 103,
114)
∫ If the HDD experiences any
abnormality, back up data
immediately.
immediately.
Failure in the HDD may produce continuous
noise or choppy sound during recording or
playing back. Continuous use will cause further
deterioration, and may eventually disable the
HDD. If these phenomena are observed, copy
the data on the HDD to a PC, a DVD disc etc.
immediately and contact your dealer.
Once the HDD is out of order, data cannot be
restored.
noise or choppy sound during recording or
playing back. Continuous use will cause further
deterioration, and may eventually disable the
HDD. If these phenomena are observed, copy
the data on the HDD to a PC, a DVD disc etc.
immediately and contact your dealer.
Once the HDD is out of order, data cannot be
restored.
∫ Operation may stop in hot or cold
environments.
The unit is disabled in order to protect the HDD.
∫ Do not use the unit in low
atmospheric pressures.
The HDD may fail if it is used at altitudes of
3000 m or higher above sea level.
3000 m or higher above sea level.
∫ Transportation
When the unit is transported, turn off the power
and be careful not to shake, fall, or impact the
unit.
and be careful not to shake, fall, or impact the
unit.
∫ Falling detection
[
] is indicated on the screen when it detects a
falling state (a weightless state). If the falling
state is detected repeatedly, the unit may stop
the recording or playback operation in order to
protect the HDD.
state is detected repeatedly, the unit may stop
the recording or playback operation in order to
protect the HDD.
Indemnity about recorded content
Panasonic does not accept any responsibility for damages directly or indirectly due to any type of
problems that result in loss of recording or edited content, and does not guarantee any content if
recording or editing does not work properly. Likewise, the above also applies in a case where any
type of repair is made to the unit (including any other non-HDD related component).
problems that result in loss of recording or edited content, and does not guarantee any content if
recording or editing does not work properly. Likewise, the above also applies in a case where any
type of repair is made to the unit (including any other non-HDD related component).
HDCSD200&HS200EB-VQT1Y50_mst.book 11 ページ ２００９年１月１５日 木曜日 午後７時４分