Panasonic HDC-HS200 Betriebsanweisung
23
VQT1Y50
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always
“live” as long as the AC adaptor is connected to an electrical outlet.
Important:
While the DC cable is connected to the AC adaptor, the battery will not charge.
≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do
“live” as long as the AC adaptor is connected to an electrical outlet.
Important:
While the DC cable is connected to the AC adaptor, the battery will not charge.
≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do
not use the AC cable from other equipment with this unit.
A DC output terminal
B DC input terminal
B DC input terminal
Insert the DC cable matching the [
] mark of the DC input terminal.
1
Connect the AC cable to the AC adaptor and the AC outlet.
2
Connect the DC cable to the AC adaptor.
3
Connect the DC cable to the DC input terminal [DC IN].
≥ Make sure to set the mode to OFF and the status indicator is turned off when disconnecting the AC
adaptor.
Connecting to the AC outlet
DC IN
HDCSD200&HS200EB-VQT1Y50_mst.book 23 ページ ２００９年１月１５日 木曜日 午後７時４分