Panasonic HDC-HS200 Betriebsanweisung
45
VQT1Y50
3
Open the LCD monitor.
The status indicator A lights red and the unit is
put into recording pause.
put into recording pause.
≥ Quick start standby mode is cancelled if
jabout 5 minutes elapsed
jmode is set to
junit is turned off
jmode is set to
junit is turned off
≥ Time for quick start will be more than
0.6 seconds slower when digital cinema is
used.
used.
≥ Depending on the recording conditions, time
for quick start may be more than 0.6 seconds
slower in still picture recording mode.
slower in still picture recording mode.
≥ It may take some time for automatic white
balance to adjust.
≥ In the quick start mode, the zoom
magnification becomes 1k.
≥ If [ECONOMY] (
l 31) is set to [5 MINUTES]
and the unit automatically goes into quick start
standby mode, close the LCD monitor and then
open it again.
standby mode, close the LCD monitor and then
open it again.
≥ Quick start standby mode cannot be released
by the remote control. Turn the mode to OFF
when powering off.
when powering off.
(Only when recording to an SD card)
The unit is put into recording pause approx.
1.9 seconds when the mode is set to
The unit is put into recording pause approx.
1.9 seconds when the mode is set to
or
from OFF.
≥ Start time will not shorten if there is no SD card
≥ Start time will not shorten if there is no SD card
inserted.
¬Change the mode to
or
.
1
Select SD card as a media to
record from the menu. (l 29)
record from the menu. (l 29)
2
Select the menu. (l 29)
≥ This function’s default setting is [ON].
≥ Depending on the recording conditions, start
time may be longer than 1.9 seconds in still
picture recording mode.
picture recording mode.
≥ In the quick power on mode, the zoom
magnification becomes 1k.
HDC-HS200
HDC-SD200
Quick power on
[MEDIA SELECT]
# [SD CARD]
[SETUP]
# [QUICK POWER ON] # [ON]
HDCSD200&HS200EB-VQT1Y50_mst.book 45 ページ 2009年1月15日 木曜日 午後7時4分