Panasonic HDC-SD800 Anleitung Für Quick Setup
10
VQT3K41 (ENG)
Charging and recording time
∫ Charging/Recording time
≥ Temperature: 25 oC/humidity: 60%RH
≥ These times are approximations.
≥ The indicated charging time is for when the battery has been discharged completely.
≥ The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as
high/low temperature.
high/low temperature.
≥ Recordable time of 3D recording mode is the same.
(During 3D recording mode, 1080/50p and iFrame recording mode can not be used.)
≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning the unit on/off, moving the zoom lever etc.
≥ The batteries heat up after use or charging. This is not a malfunction.
Battery model number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
mode
Maximum
continuously
recordable time
Actual
recordable
time
Supplied battery/
VW-VBN130 (optional)
[7.2 V/1250 mAh]
2 h 30 min
[1080/50p]
1 h 40 min
1 h
[HA], [HG],
[HX], [HE]
1 h 45 min
1 h 5 min
[iFrame]
1 h 50 min
1 h 10 min
Battery capacity indication
≥ The display changes as the battery capacity reduces.
#
#
#
#
If there is less than 3 minutes remaining, then
will become red. If the battery
discharges, then
will flash.
≥ The remaining battery capacity is displayed when using the Panasonic battery that you
can use for this unit. The actual time can vary depending on your actual use.
≥ When using the AC adaptor or batteries made by other companies, the remaining
battery capacity will not be shown.
Simplified_HDC-SD800EP_eng.book 10 ページ ２０１１年１月５日 水曜日 午後８時３０分