Panasonic NV-GS150 Benutzerhandbuch

Record mode

LSQT0861

Reduces the jitter caused by hand movement 
when recording.
≥Set to Tape Recording Mode.

ª

Set [ADVANCE] >> [EIS] >> [OFF].

≥When a tripod is used, we recommend that you 

turn the image stabilizer function off.

≥Under fluorescent lighting, image brightness 

may change or colors may not look natural.

≥If the image stabilizer function is set when the 

wide function is used, the wide function will be 
canceled.

≥When the MagicPix function is used, the image 

stabilizer function does not work. If so, the [EIS] 
indication flashes.

≥In the following cases, the image stabilizer 

function may not work effectively.

≥When the digital zoom is used
≥When recording is done in an extremely dark 

place

≥When the Camcorder is shaken greatly
≥When you record a moving subject while 

tracking it

Records still pictures continuously at a certain 
interval.
≥Set to Card Recording Mode.

Set [BASIC] >> [PICTURE SIZE] >> [640].

Set [ADVANCE] >> [BURST MODE] >> [ON].

Press and hold the [PHOTO SHOT] button.

ª

Release the [PHOTO SHOT] button.

≥The Camcorder records up to 10 still pictures at 

intervals of 0.5 seconds. If the shutter speed is 
manually set to 1/30, then the still pictures can 
be recorded at intervals of 0.7 seconds.

≥One more still picture may be recorded after you 

release the [PHOTO SHOT] button.

≥The flash is not used.
≥If [SELF TIMER] >> [YES] is set, the Camcorder 

records the maximum number of pictures 
recordable.

≥Intervals between recording pictures may 

become longer depending on the card. We 
recommend using a Panasonic SD Memory 
Card.

≥When using a card formatted by other 

equipment or a card that was recorded and 
erased repeatedly, the intervals between 
recording pictures may become longer. If so, 
back up your important data on a PC, and 
format your card with this Camcorder.

PHOTO
SHOT

LSQT0861Eng.book  37 ページ  ２００４年１２月２２日　水曜日　午後２時３４分