Panasonic NV-GS150 Benutzerhandbuch

Menu

LSQT0861

ª

Set to [LOWCUT] and this reduces low sound 
noise and wind noise hitting the stereo zoom 
microphone (VW-VMH3; optional) mounted on 
the smart accessory shoe.

ª

This switches between date and time indications.
≥The Camcorder automatically records the date 

and time the picture was taken on the tape.

≥You can also show or change the date/time 

indication by repeatedly pressing the [DATE/
TIME] button on the remote control.

ª

Switches the audio (PCM audio) recording 
systems.
[12bit]: Records audio in “12 bit 32 kHz 4 tracks”. 

(The original audio signals can be kept 
after the other audio signals are dubbed.) 

[16bit]: Records audio in “16 bit 48 kHz 2 tracks”. 

Audio can be recorded in higher quality. 
(If audio signals are dubbed, then the 
original audio signals will be erased.) 

ª

Set to [ON] and this turns the recording lamp on 
during recording, which indicates that recording is 
underway. Set to [OFF] and this does not turn on 
the lamp even when recording is underway.

ª

Set to [ON] and the display mode can be switched 
to all functions. Set to [OFF] and it can be 
switched to minimum display.

ª

Set to [ON] and confirmation/alarm beeps are 
issued as follows.
1 Beep
≥When you start recording
≥When you turn on the power
2 Beeps
≥When you pause recording
2 Beeps for 4 times
≥When a cassette with its erasure prevention tab 

set to [SAVE] is inserted, condensation occurs, 
and at other times. Check the sentence 
displayed on the screen.

ª

This switches among the output settings of the 
AV/headphone terminal.
[OUT/

Ë]: Automatically switches between AV 

and headphone output.

[OUT]:

Use this setting when image or sound 
is not output normally to the TV in 
[OUT/

Ë].

≥When using the headphone, set to [SETUP] or 

[BASIC] >> [AV JACK] >> [OUT/

Ë]. If set to 

[OUT], you may hear noises on the right.

ª

Set to [ON] and the settings (shutter speed, iris/
gain values, and white balance settings (

), 

etc.) used during the recordings are displayed 
during playback.
≥When the [AUTO/MANUAL/FOCUS] switch is 

set to [AUTO], the indication [AUTO] will 
appear.

≥When there is no data, [---] appears on the 

display. 

≥If the Camcorder data of the Camcorder are 

played back on other equipment, the settings 
information is sometimes not displayed 
normally.

ª

This switches the sound to be played back.
[STEREO]: Stereo sound (main sound and sub 

sound) 

[L]:

Left channel sound (main sound) 

[R]:

Right channel sound (sub sound) 

LSQT0861Eng.book  63 ページ  ２００４年１２月２２日　水曜日　午後２時３４分