Panasonic NV-GS250 Betriebsanweisung

Edit mode

VQT0N73

;] button on the remote control 

≥When the free style remote control is used, 

start recording with the [TALK] button 
pressed.

≥Talk into the microphone. Or start play on the 

playing device.

;] button on the remote control 

≥If a tape has a non-recorded portion when the 

tape is dubbed, images and sounds may be 
disturbed when this portion of the tape is played 
back.

ª

≥Set to Tape Recording Mode.
≥When you want to preserve the original sound 

taken during recording, set [SETUP] >> 
[AUDIO REC] >> [12bit] to take pictures. (When 
set [16bit], the sounds taken during recording 
are erased after recording with audio dubbing.) 

≥Set [BASIC] >> [REC SPEED] >> [SP] to take 

pictures.

ª

You can switch between the sound recorded with 
audio dubbing and the original sound.
Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX].
[ST1]: It only plays back the original sound.
[ST2]: It only plays back the sound added by 

audio dubbing.

[MIX]:

It simultaneously plays back the original 
sound and the sound added with audio 
dubbing.

ª

≥When pausing the audio  dubbing, set the 

[12bit AUDIO] on the [SETUP] Sub-Menu to 
[ST2] and you can check the pre-recorded 
sound. When the line input is used, you can dub 
audio while listening to the pre-recorded sound 
from the speaker.

To print pictures by directly connecting the movie 
camera to the printer, use a printer compatible 
with PictBridge. (Read the operating instructions 
for the printer.) 
≥Insert a card and set to Picture Playback 

Connect the movie camera and the printer 
with the supplied USB cable.

1 USB cable

≥The [PictBridge] indication appears on the 

screen of the movie camera.
(When the printer is being recognized, the 
[PictBridge] indication blinks.)

≥When no card is inserted in the movie camera, 

the [PictBridge] indication does not appear. 
(You cannot print any pictures.) 

≥When the movie camera and the printer are not 

connected properly, the [PictBridge] indication 
keeps blinking. (It will blink for over approx. 
1 minute.) Connect the cable or check the 
printer.

≥We recommend using the AC adaptor as the 

power supply.

≥When images are displayed in multi-screen, 

they cannot be printed.

Select [SINGLE PRINT] or [DPOF PRINT].
≥If there is no file with a DPOF setting, you 

cannot select [DPOF PRINT].

≥When you select [DPOF PRINT] for printing, 

set the number of prints in DPOF setting.

≥When [DPOF PRINT] is selected, print after  

you determine the paper size.

V

W

¥ 

V

W

1

GS250GN.book  43 ページ  ２００５年１月２６日　水曜日　午後１２時１７分