Panasonic PV-GS36 Bedienungsanleitung
15
Before Using
While the Camcorder is accessing the Card (reading,
recording, playback or erasing), the Card Access
Lamp lights up.
• While the Card Access Lamp is on, never attempt
recording, playback or erasing), the Card Access
Lamp lights up.
• While the Card Access Lamp is on, never attempt
to open the Card Slot Cover, to pull out the Card,
to turn off the Camcorder, or to turn the Mode Dial.
Such actions will damage the Card, and recorded
data, and cause the Camcorder to malfunction.
to turn off the Camcorder, or to turn the Mode Dial.
Such actions will damage the Card, and recorded
data, and cause the Camcorder to malfunction.
Card Access Lamp
Turning on the Camcorder
Turn on the power first and then select modes
How to Turn on the Power
1
Set the [OFF/ON] Switch to [ON] while
pressing the button
1
.
1
1
Turn off the Power.
2
Open the LCD Monitor and then open the
Card Slot Cover.
3
While holding the Memory Card with its
cut corner facing right
1
, insert/remove it
into/from the Card Slot.
Inserting/Removing a Card
4
Close the Card Slot Cover securely.
Removing the Card
Open the Card Slot Cover and press the center of
the Card and then pull it straight out.
• After removing the Card, close the Card Slot
the Card and then pull it straight out.
• After removing the Card, close the Card Slot
Cover.
• The Camcorder may be damaged if the Card is
forced out when the Card is fully inserted.
Using a Memory Card (Optional)
A Card can be used to record still pictures.
• Use a genuine SD Memory Card manufactured by
Panasonic only.
Before inserting or removing a Card, be sure
to turn off the Camcorder.
to turn off the Camcorder.
• Otherwise, the Camcorder may not function
properly or it may cause the loss of recorded data
in a Card.
in a Card.
Accidental Erasure Prevention
1
Opening the accidental erasure prevention slider
1
on the cassette (by sliding it to the [SAVE] arrow
direction) prevents recording. To enable recording,
close the accidental erasure prevention slider (by
sliding it to the [REC] arrow direction).
close the accidental erasure prevention slider (by
sliding it to the [REC] arrow direction).
Concerning the Card
• Do not touch the terminals on the back of the
card.
• Do not format the card with another Camcorder
or any personal computer. This operation may
make the card unusable.
make the card unusable.
• Electrical noise, static electricity, or failure of the
Camcorder or the card may damage or erase
the data stored on the card. We recommend
saving important data on a personal computer by
using a USB Cable, PC Card Adaptor, and USB
Reader/Writer.
the data stored on the card. We recommend
saving important data on a personal computer by
using a USB Cable, PC Card Adaptor, and USB
Reader/Writer.
SD Memory Card
• The memory capacity indicated on the SD
Memory Card label corresponds to the total
amount of capacity to protect and manage
the copyright and the capacity available as
conventional memory for a Camcorder, personal
computer or other equipment.
amount of capacity to protect and manage
the copyright and the capacity available as
conventional memory for a Camcorder, personal
computer or other equipment.
1
Concerning the Write Protection
Switch on the SD Memory Card
The SD Memory Card has a write protection
switch on it. If the switch is moved to [LOCK], you
cannot write to the card, erase the data on it, or
format it. If it is moved back, you can.
switch on it. If the switch is moved to [LOCK], you
cannot write to the card, erase the data on it, or
format it. If it is moved back, you can.
2
Open the LCD Monitor or extend the
Viewfi nder to use.
• The [STATUS] Indicator lights Red and turn on
the power.
• The LCD Monitor or Viewfinder will be
activated.