Panasonic PV-GS36 Bedienungsanleitung

Basic Setup Sub-Menu

Date and Time Indication (pp. 23, 56)

Setting the Lock (p. 43)

Advance Setup Sub-Menu

Setting DPOF (p. 43)

Formatting a Card (p. 44)

Setup Sub-Menu

Display Mode (p. 23)

LCD Adjustment (p. 17)

Viewfinder Adjustment (p. 17)

Power Save Mode (p. 23)

Language Setup Sub-menu (p. 21)

„

BASIC

ADVANCED

SETUP

LANGUAGE

SETUP   ENTER    EXIT

BASIC

DATE/TIME
PROTECT

D/T

NO

SETUP   ENTER    EXIT

e.g.,

„

This switches between date and time indications.
Set [   BASIC] or [   SETUP] >> [   DATE/TIME] 
>> [D/T], [DATE] or [OFF].
•  The Camcorder automatically records the date 

and time of picture taking on the tape.

„

Set [   SETUP] >> [   DISPLAY] >> [ON] or [OFF]. 
Set to [ON] and the display mode can be switched 
to all functions. Set to [OFF] and it can be 
switched to minimum display.

„

•  Set to Tape Recording Mode.
You can select the sound quality of the recorded 
sound.
Set [   ADVANCED] >> [   AUDIO REC] >> 
[12bit] or [16bit].
[12bit]: 

Records audio in “12 bit 32 kHz 4 tracks”. 
(The original audio signals can be kept 
after the other audio signals are dubbed.)

[16bit]: 

Records audio in “16 bit 48 kHz 
2 tracks”. Audio can be recorded in 
higher quality. (If audio signals are 
dubbed, then the original audio signals 
will be erased.)

„

•  Set to Tape/Card Recording Mode.
When [   BEEP SOUND] on the [   SETUP] is 
set to [ON], confirmation/alarm beeps are issued 
as follows.
1 Beep
•  When you start recording
•  When you turn on the power
•  When the unit goes from Quick Start standby 

mode to recording pause

2 Beeps
•  When you pause recording
•  When you turn off the power
•  When the unit goes into Quick Start standby 

mode

2 Beeps 4 times
•  When a cassette with its erasure prevention tab 

set to [SAVE] is inserted, condensation occurs 
(p. 59), and at other times. Check the sentence 
displayed on the screen (p. 57).

„

Set [   SETUP] >> [   POWER SAVE] >> 
[5 MINUTES] or [OFF].
[OFF]:
When about 5 minutes passed without any 
operation, the standby mode automatically will be 
set. In the standby mode, [   ] blinks and it takes 
time more than usual to start recording after you 
press the Recording Start/Stop Button.
[5 MINUTES]:
When about 5 minutes passed without any 
operation, the Camcorder automatically turns off 
to protect the tape or to prevent the battery from 
running down. When you use the Camcorder, turn 
it on again.
•  In the following cases, the power may not 

turn off even when set [   POWER SAVE] >> 
[5 MINUTES].
-  When connecting to the AC Jack

(When using the AC Adaptor)

-  When connecting the USB Cable or the DV 

Cable to a PC or other equipment

-  When the PC Mode

„

This switches the sound to be played back.
Set [   SETUP] >> [   AUDIO OUT] >> 
[STEREO], [L] or [R].
[STEREO]: 

Stereo sound (main sound and sub 
sound)

[L]: 

Left channel sound (main sound)

[R]: 

Right channel sound (sub sound)