Panasonic PV-GS36 Bedienungsanleitung

Seite von 76
With a PC
47
Using Camcorder with a PC
An image stored on the DV Cassette or Memory 
Card can be transferred to your personal computer.
Software Installation (For Windows)
•  If you have Internet access, please download the 
USB Driver.
With a PC
1
  To download and install the Driver, go to:
http://www.panasonic.com/consumerdownloads
„
 USB Driver (pp. 47~48)
When the Camcorder is connected to your PC, 
you can send video from your Camcorder to other 
parties via a network or the Internet.
2
  Click the software to be downloaded.
Using the USB Function 
The USB connection can be used in one of the 
following two ways.
1
  In PC Mode, with the PC connected, the SD drive 
can be used (p. 48).
2
  In Tape Recording or Tape Playback Mode, with 
the PC connected, a motion image can be used 
(pp. 50~53).
•  Check your OS in the Operating Environment 
section on page 47 and if necessary, install the 
USB Driver before using the USB function.
Operating environment
•  Despite having the Operating environment 
indicated, it may not be possible to use the program 
with some types of personal computers.
•  When you connect to an USB 2.0 interface 
board, use a certified board with the USB 2.0 
(FULL-SPEED USB) logo.
„
 For Windows
OS:
1
 Function:
IBM PC/AT compatible personal computer with 
pre-installed:
Microsoft Windows XP Professional/Home Edition
Microsoft Windows 2000
•  The USB equipment operates with the driver 
installed standard on your OS.
2
 Function:
•  This is the Operating environment for the USB 
Driver which can be installed from the Web Site.
IBM PC/AT compatible personal computer with 
pre-installed:
Microsoft Windows XP Professional/Home Edition 
SP2 or later
Microsoft Windows 2000 SP4 or later
•  For Windows 2000 users:
Please download and install the USB Driver from 
the Web Site.
•  For Windows XP SP2 users:
The USB equipment operates with the driver 
installed standard on your OS.
CPU:
Intel Pentium ll 300 MHz or higher 
(including compatible CPU)
RAM:
32 MB or more (64 MB or more recommended)
Free hard disk space:
At least 30 MB or more
Interface:
USB 1.1 or more - A Type
„
 For Macintosh
OS:
Mac OS X v 10.1 – X v 10.4
(Function 
1
 Only)
CPU:
Power PC G3 (400 MHz or higher), G4, G5
RAM:
64 MB or more
•  The USB equipment operates with the driver 
installed standard on your OS.
•  For Windows XP users, the USB equipment 
operates with the driver installed standard on your 
OS.
•  If you have Internet access, please download the 
USB Driver.
1
  To download and install the Driver, go to:
http://www.panasonic.com/consumerdownloads
Installing the USB Driver
2
  Click [Camcorder] on the screen.
3
  Click [USB Driver (for Web Camera)].
4
  Decompress the downloaded data.
5
 Double 
click   icon.
•  The set up program starts running.
6
  Finish installation by following the 
on-screen instructions.
•  Click [Next] and proceed with installation.
•  After completing the installation, click [Finish].