Panasonic PV-GS36 Bedienungsanleitung
58
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
Cautions for Use
After Use
1
Take out the Cassette. (p. 14)
2
Set the [OFF/ON] Switch to [OFF].
3
Take out the Card. (p. 15)
4
Detach the power supply and retract the
Viewfi nder or the LCD Monitor. (p. 17)
5
To protect the Lens, attach the supplied
Lens Cap.
Cautions for Use
When you use your Camcorder on a rainy or
snowy day or on a beach, make sure that no
water enters the Camcorder.
snowy day or on a beach, make sure that no
water enters the Camcorder.
• Water may cause the Camcorder or Cassette to
malfunction. (Irreparable failure may occur.)
• If sea water splashes onto the Camcorder, wet a
soft cloth with tap water, wring it well, and use it to
wipe the camera body carefully. Then, wipe it again
thoroughly with a soft dry cloth.
wipe the camera body carefully. Then, wipe it again
thoroughly with a soft dry cloth.
Keep the Camcorder away from magnetized
equipment (such as a microwave oven, TV,
video game equipment, etc.).
equipment (such as a microwave oven, TV,
video game equipment, etc.).
• If you use the Camcorder on or near a TV, images
or sounds may be disturbed due to electromagnetic
wave radiation.
wave radiation.
• Do not use near a cell phone because doing so
may cause noise to adversely affect the picture and
sound.
sound.
• Recordings on the tape may be damaged, or
images may be distorted, by strong magnetic fields
created by speakers or large motors.
created by speakers or large motors.
• Electromagnetic wave radiation generated by
a microprocessor may adversely affect the
Camcorder, causing the disturbance of images and
sounds.
Camcorder, causing the disturbance of images and
sounds.
• If the Camcorder is affected by magnetically
charged equipment and does not function properly,
turn off the Camcorder power and detach the
Battery or AC Adaptor and then connect the Battery
or AC Adaptor again. Thereafter, turn on the
Camcorder power.
turn off the Camcorder power and detach the
Battery or AC Adaptor and then connect the Battery
or AC Adaptor again. Thereafter, turn on the
Camcorder power.
Do not use your Camcorder near radio
transmitters or high-voltage cables.
transmitters or high-voltage cables.
• If you record pictures near radio transmitters or
high-voltage cables, recorded images or sounds
may be adversely affected.
may be adversely affected.
Do not use this Camcorder for surveillance
purposes or other business use.
purposes or other business use.
• If you use the Camcorder for a long period of
time, the internal temperature increases and,
consequently, this may cause malfunction.
consequently, this may cause malfunction.
• This Camcorder is not intended for business use.
When you use your Camcorder on a beach or
similar place, do not let sand or fine dust get
into the Camcorder.
similar place, do not let sand or fine dust get
into the Camcorder.
• Sand or dust may damage the Camcorder or
Cassette. (Care should be taken when inserting
and removing the Cassette.)
and removing the Cassette.)
Do not spray insecticides or volatile
chemicals onto the Camcorder.
chemicals onto the Camcorder.
• If the Camcorder is sprayed with such chemicals,
the camera body may be deformed and the surface
finish may peel off.
finish may peel off.
• Do not keep rubber or plastic products in contact
with the Camcorder for a long period of time.
Do not use benzine, thinner or alcohol for
cleaning the Camcorder.
cleaning the Camcorder.
• The Camcorder body may be deformed and the
surface finish may peel off.
• Before cleaning, detach the Battery or pull out the
AC Cable from the AC Jack.
• Wipe the Camcorder with a soft dry cloth. To
remove stubborn stains, wipe with a cloth that
is soaked in a detergent diluted with water and
afterwards finish wiping with a dry cloth.
is soaked in a detergent diluted with water and
afterwards finish wiping with a dry cloth.
• For storing or transporting the Camcorder, place
it in a bag or case lined with soft pads so as to
prevent the coating on the camera body from being
worn.
prevent the coating on the camera body from being
worn.
After use, be sure to take the Cassette out and
detach the Battery from the Camcorder or pull
out the AC Cable from AC Jack.
detach the Battery from the Camcorder or pull
out the AC Cable from AC Jack.
• If the Cassette is left in the Camcorder, the tape
sags and deteriorates.
• If the Battery is left on the Camcorder for a long
time, the voltage drops excessively, and the Battery
will not function even after it is recharged.
will not function even after it is recharged.
About AC Adaptor
• If the temperature of the Battery is extremely
high or extremely low, the [CHARGE] Lamp may
continue flashing, and the Battery may not be
charged. After the temperature of the Battery has
decreased or increased sufficiently, charging starts
automatically. If the [CHARGE] Lamp continues
to flash even after the Battery temperature has
decreased or increased sufficiently, the Battery
or AC Adaptor may be faulty. In this case, please
contact a dealer.
continue flashing, and the Battery may not be
charged. After the temperature of the Battery has
decreased or increased sufficiently, charging starts
automatically. If the [CHARGE] Lamp continues
to flash even after the Battery temperature has
decreased or increased sufficiently, the Battery
or AC Adaptor may be faulty. In this case, please
contact a dealer.
• If the Battery is warm, charging takes a longer time
than normal.
• If you use the AC Adaptor near a radio, radio
reception may be disturbed. Keep the AC Adaptor
3 feet (1 meter) or more away from radio.
3 feet (1 meter) or more away from radio.
• When using the AC Adaptor, it may generate
whirring sounds. However, this is normal.
• After use, be sure to pull out the AC Cable from
the AC Jack. (If they are left connected, a minute
amount of current is consumed.)
amount of current is consumed.)
• Always keep the electrodes of the AC Adaptor and
Battery clean.