Panasonic PV-L353 Betriebsanweisung

Basic Operation

Camera Recording

Before you begin...

• Connect Camcorder to power source.
• Insert cassette with record tab (page 11).

View recording scene on EVF (Electronic
Viewer Finder) or LCD (Liquid Crystal
Display) monitor.

Recording via EVF or LCD
Monitor

Note:
• When Camcorder is aimed at excessively

bright objects, or bright lights, a vertical
bar may appear in the picture. This is
normal for the CCD pick-up. Try to avoid
this when possible.

• Using LCD monitor reduces battery

operation time. Return LCD monitor to
locked position when not in use.

EVF or LCD Monitor

(Record/Pause mode)

CAUTION :

Rotating partially open LCD monitor may block
cassette door and damage Camcorder body.

VISION
ADJUSTMENT

Built-in
Microphone

To adjust LCD BRIGHT

Press MENU for
MENU mode.
Press UP or DOWN
to select

LCD BRIGHT

Press M.FOCUS for
LCD BRIGHT
SETTING menu.
Press UP or DOWN
to adjust LCD monitor
brightness level.

Press LCD-OPEN to unlock the LCD
monitor. Swing LCD monitor fully
open and adjust viewing angle.

Set POWER to
CAMERA.

• Be sure POWER

is fully turned to
CAMERA position.

• EVF or LCD monitor

turns on/off by the POWER switch.

• Both EVF and LCD monitor turn on

when LCD is at 180

° (see above left).

This allows both you and the subject
to view the recording.

LCD : Adjust LCD monitor brightness

level.
See

To adjust LCD BRIGHT

below.

EVF : Look into EVF and adjust

VISION ADJUSTMENT to your
eyesight.

Set REC MODE to “SP” or “SLP” in
the CAMERA MODE Menu (page 13).

Press RECORD/PAUSE to start or
pause recording.

Set POWER to OFF when finished.

• To remove the cassette, slide the

TAPE EJECT switch (page 11).

03.L353 Basic p17-19

02.12.12, 10:31 AM