Panasonic vdr-m53 Betriebsanweisung
125
13
Initializing DVD-RAM Disc or Card (Format Disc. Format Card)
1
Press the DISC NAVIGATION button.
2
Press the MENU button.
3
Choose “Format Disc” or “Format Card” on the
“Disc” or “Card” menu screen, and then press the
A button.
“Disc” or “Card” menu screen, and then press the
A button.
The screen for verifying “Format Disc” or “Format
Card” will appear.
Card” will appear.
4
Choose “YES”, and then press the A button.
Choose “NO” to cancel initialization.
When initializing one side of the disc is complete,
the DVD Video Camera will return to recording
pause mode.
the DVD Video Camera will return to recording
pause mode.
Note
:
•
Initialization will delete all the recorded contents on disc
or card. Be careful not to delete data by mistake.
or card. Be careful not to delete data by mistake.
•
Be sure to use the AC adaptor when initializing disc or
card so that the DVD Video Camera is not turned off
midway. If initialization is interrupted by power turning off,
the disc or card will not be initialized correctly, or it may be
damaged.
card so that the DVD Video Camera is not turned off
midway. If initialization is interrupted by power turning off,
the disc or card will not be initialized correctly, or it may be
damaged.
•
It may not be possible to initialize a disc with many
scratches or dirt. Such a disc cannot be used.
scratches or dirt. Such a disc cannot be used.
•
If you use a brand-new DVD-R disc, message “Disc is not
formatted” will appear. Initialize the disc, following the
subsequent messages (See page 47).
formatted” will appear. Initialize the disc, following the
subsequent messages (See page 47).
•
This DVD Video Camera may not recognize some discs
or cards that have been initialized on PC or a device other
than this DVD Video Camera.
or cards that have been initialized on PC or a device other
than this DVD Video Camera.
•
If you attempt to initialize a disc or card in this DVD Video
Camera using a PC connected to the DVD Video Camera
via USB cable, the disc or card may not be initialized and
may be unusable on this DVD Video Camera.
Camera using a PC connected to the DVD Video Camera
via USB cable, the disc or card may not be initialized and
may be unusable on this DVD Video Camera.
Before You Begin
• Take great care that power is not turned off during initialization. If the DVD
Video Camera is turned off during initialization and the initialization is
interrupted, incorrect initialization will result, and at worst, the data
recorded on disc or card before initialization was interrupted may be
damaged.
interrupted, incorrect initialization will result, and at worst, the data
recorded on disc or card before initialization was interrupted may be
damaged.
ENTER
All data will be deleted.
Format the disc now?
Format the disc now?
Format Disc
YES
NO
ENTER
All data will be deleted.
Format the card now?
Format the card now?
Format Card
YES
NO
(When using card)
(When using
DVD-RAM disc)
DVD-RAM disc)
VDR-M95M75M55M53PP.book Page 125 Tuesday, March 29, 2005 2:19 PM