Panasonic SDR-H20 Benutzerhandbuch
46
LSQT1214
Recording
To cancel the colour night view function
Select [
] again.
≥ The colour night view function makes the
signal charging time of CCD up to
approximately 25k longer than usual, so that
dark scenes can be recorded brightly. For this
reason, bright dots that are usually invisible
may be seen, but this is not a malfunction.
approximately 25k longer than usual, so that
dark scenes can be recorded brightly. For this
reason, bright dots that are usually invisible
may be seen, but this is not a malfunction.
≥ If you turn off the power or operate the mode
dial, the colour night view function is cancelled.
≥ If set in a bright place, the screen may become
whitish for a while.
[HDD] [SD]
You can record still pictures using the timer.
¬Rotate the mode dial to select
.
1
Press the joystick. Then move
the joystick down to display the
icon shown in the illustration.
the joystick down to display the
icon shown in the illustration.
2
Move the joystick left to select
[Ø].
[Ø].
3
Press the Photoshot button [
].
After the [Ø] display flashes for approx.
10 seconds, a still picture will be recorded.
≥ After recording, the self-timer is cancelled.
≥ If you press the Photoshot button [
≥ After recording, the self-timer is cancelled.
≥ If you press the Photoshot button [
] halfway
and then fully in auto focus mode, the subject
is focused when the button is pressed halfway.
(SDR-H250)
(SDR-H250)
≥ When you press the Photoshot button [
]
fully in auto focus mode, the subject is focused
just before recording. (SDR-H250)
just before recording. (SDR-H250)
To stop the timer midway through
Press the MENU button. (The self-timer setting is
cancelled.)
cancelled.)
≥ If you turn off the power, the self-timer standby
mode is cancelled.
≥ Depending on the time taken to bring the
subject into focus, the recording may take
longer than the set time before the picture is
taken.
longer than the set time before the picture is
taken.
[HDD] [SD]
You can check if the image is level while
recording by using the lines displayed on the
screen.
recording by using the lines displayed on the
screen.
¬Rotate the mode dial to select
or
.
Press the MENU button, then select
[BASIC]
[BASIC]
# [GUIDE LINES] # [ON]
and press the joystick.
To cancel the Recording guideline
function
function
Press the MENU button, then select [BASIC]
#
[GUIDE LINES]
# [OFF] and press the joystick.
≥ The guidelines do not appear on the images
actually recorded.
≥ The guidelines are not displayed while rotating
the LCD monitor frontward to record yourself.
Self-timer recording
This is for recording shots of yourself
as well.
as well.
1/2
1/2 NEXT
NEXT
1/2 NEXT
1/2
1/2 NEXT
NEXT
1/2 NEXT
Recording guideline
function
function
Checking if the image is level.
MENU
LSQT1214_GN.book 46 ページ ２００７年２月８日 木曜日 午後８時５０分