Panasonic SDR-SW20 Benutzerhandbuch

Seite von 116
34
VQT1M21
Recording
2
  Automatic recording 
(motion pictures)
1
Set to [
].
2
Press 
.
3
Start recording.
Recording 
mode
Time elapsed
Time remaining (flashes 
red when under 1 minute)
Recording in 
progress (red)
Recording continues even if the 
LCD monitor is closed.
4
Stop recording.
Paused (green)
The unit is still recording if [ ] is 
red. Do not move the unit.
●  When the unit is running on battery power, power is automatically shut OFF 
to conserve battery life if no operations are performed for about 5 minutes. To 
reuse the unit, set the mode dial to [OFF] and then reselect a mode.
To prevent power from shutting OFF automatically: (P.84 [POWER SAVE])
●  The interval between starting and stopping recording is recorded as one single 
scene. The counter is reset to “0h00m00s” after each scene.
●  At the time when the unit is purchased, the audio recording mode is set to 
[DOLBY]. For playback in a device which does not support Dolby Digital, set 
[AUDIO REC] to [MPEG]. (P.84)
 To change aspect ratio to 4:3
  
→[ADVANCED]→
[ASPECT]
→[4:3]
Default aspect ratio at the time of 
purchase is set to 16:9 (widescreen).
  To remove sound when record 
button is pressed
  
→[SETUP]→
[BEEP SOUND]
→[OFF]
  To remove on-screen display
  
→[SETUP]→
[DISPLAY]
→[OFF]