Panasonic sv-av10 Benutzerhandbuch

Turning the Power ON

Install the battery or plug in the AC adaptor. (

l 6)

Hold down the [

] button for about two seconds.

≥The SD Multi AV Device is turned on.
≥The message [PLEASE WAIT] is displayed for a while and then the

mode selection screen will be displayed.

≥If the device is not used for 10 minutes or longer , the power is

automatically turned off. Press the [

] button again to turn it

back on.

ª Turning the Power OFF

While the Power is on, hold down the [

] button for about two

seconds.

Selecting Operation Modes

Select a desired mode on the mode selection screen.

Press the [MODE] Button.

≥The mode selection screen 1 appears.
≥The mode selection screen also appears when the power is

turned on.

Press the [MODE] Button to select [REC] or [PLAY].

≥Toggles back and forth between [REC] and [PLAY] by a push.

Move the Jog Lever up or down to select a desired
mode.

Press down the center of the Jog Lever

≥The mode selection screen disappears, and the selected mode is

now set.

ª About the Operation Modes

Seven operation modes are provided as follows.
≥Moving picture (MPEG4 format) record mode [REC>>MPEG4]
≥Moving picture (MPEG4 format) play mode [PLAY>>MPEG4]
≥Still picture (JPEG format still picture) record mode [REC>>PICTURE]
≥Still picture (JPEG format still picture) play mode [PLAY>>PICTURE]
≥Sound (VOICE format) record mode [REC>>VOICE]
≥Sound (VOICE format) play mode [PLAY>>VOICE]
≥Music (MPEG2-AAC music/ MP3 format) play mode [PLAY>>MUSIC]

MENU

MODE/

REC

PLAY

PUSH/SET

SELECT

MPEG4

PICTURE

VOICE

1,2

3,4

SDV1U.book 8 ページ２００２年２月１５日金曜日午後９時４４分