Panasonic sdr-sw21 Benutzerhandbuch
46
VQT2A17
47
VQT2A17
47
VQT2A17
Recording
6
Other recording options
(cont.)
Operation icons can be used to set effects, compensate brightness or
perform other operations in one easy step.
perform other operations in one easy step.
indicates functions used with motion pictures and
functions used with
still pictures.
PRE-REC function
To ensure that you won’t pass up any recording opportunities, the picture
and sound are recorded starting about 3 seconds before the record button is
pressed.
and sound are recorded starting about 3 seconds before the record button is
pressed.
Display operation icons.
Select [
].
2/2NEXT
2/2NEXT
“PRE-REC” is displayed on the LCD monitor screen.
The picture and sound are recorded starting about 3 seconds before the
record button is pressed.
Aim this unit at the subject and position it securely.
Economy Mode is not available.
Select the icon again to cancel the function.
The function is released if recording is not started within 3 hours after the
function is set.
The picture and sound are recorded starting about 3 seconds before the
record button is pressed.
Aim this unit at the subject and position it securely.
Economy Mode is not available.
Select the icon again to cancel the function.
The function is released if recording is not started within 3 hours after the
function is set.
●
●
●
●
●
●
●
●
●
●
Start recording.
The beep sound does not sound.
The PRE-REC function setting is released when recording is started. To use
the function again, set it again.
The PRE-REC function setting is released when recording is started. To use
the function again, set it again.
Cannot be used during still picture recording.
The PRE-REC function setting is released in the following situations.
The PRE-REC function setting is released in the following situations.
When the mode dial is rotated
When the power is turned off
When the card/battery door is opened
When the MENU button is pressed
When the unit has been connected to another device using the USB cable
When the power is turned off
When the card/battery door is opened
When the MENU button is pressed
When the unit has been connected to another device using the USB cable
●
●
●
●
●
●
•
•
•
•
•
•
•
•
•
It is not possible to set the PRE-REC function when less than one minute is
left for recording pictures.
When recording has been started within 3 seconds after the PRE-REC
function is set, the scenes starting from the moment when the function was
first set will be recorded.
The camera shake which occurs when the record button is pressed or the
sound of the button being operated may be recorded.
It is not possible to add any fade effects (P.43).
left for recording pictures.
When recording has been started within 3 seconds after the PRE-REC
function is set, the scenes starting from the moment when the function was
first set will be recorded.
The camera shake which occurs when the record button is pressed or the
sound of the button being operated may be recorded.
It is not possible to add any fade effects (P.43).
●
●
●
●