Panasonic PV-DF2703 Betriebsanweisung

Basic Operation

R-AUDIO OUT-L VIDEO OUT S-VIDEO OUT

L-AUDIO IN2-R

VIDEO IN2

S-VIDEO IN2

R-AUDIO IN1-L VIDEO IN1 S-VIDEO IN1

Playback (Source)

Recording (Editing) unit

Insert pre-recorded
tape.

Insert blank tape with
record tab.

• Dubbing tapes protected with

Copy Guard will have poor
quality results.

2
3

Press PLAY then press PAUSE at starting
point to put in Standby mode.

Press PLAY to start dubbing.

Press STOP to stop dubbing.

Select “LINE” mode.
See “Selecting Input Mode” below.

Selecting Input Mode

• Unauthorized exchanging and/or copying

of copyrighted recordings may be copyright
infringement.

• Please note that some tapes cannot be dubbed

on this unit. Also, it is not possible to dub
DVD/Video CD/CD to VHS tape using this unit.

Caution

(Perform operation of steps 4 and 5 on both units at same time.)

Copy Your Tapes (Dubbing)

Press REC, then press STILL/PAUSE
immediately to put in Standby mode.

Press STILL/PAUSE to start dubbing.

Press STOP to stop dubbing.

Method 1:

Press CH

. The display will change as follows.

Method 2:

a Press ACTION for MAIN MENU.
b Press

to select “TV,” then press SET

for SET UP TV screen.

c Press

to select “INPUT SELECT,” and

then press SET to select “TUNER,” “LINE1” or
“LINE2.”

d Press ACTION twice to exit this mode.

Connections you’ll need to make

Recording (Editing) unit

Playing (Source) VCR

*Important: If

remote control button does not work when pressed, press the

button on the remote and try

the button again.

If cables are connected to both connectors (S-VIDEO IN or VIDEO IN), the S-VIDEO
signal will be selected automatically. (The S-VIDEO signal has priority.) If you would
like to display the VIDEO signals being input to the VIDEO IN connector, do not
connect any cables to the S-VIDEO IN connector.

125

LINE1

(CABLE)

(TV)

LINE2