Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Panasonic
  4. cn-nvd905
  5. Betriebsanweisung

Panasonic cn-nvd905 Betriebsanweisung

Download
Seite von 118
 Preset  memory
The station being received can be stored manually under 
a selected number. (Manual preset)
Select the frequency, then touch and 
hold the number under which you 
wish to store the frequency for at 
least 2 seconds.
   The station being received is stored under the 
selected number.
Note:
   It is also possible to search automatically for 
receivable frequencies and store them.
   Under FM, 6 channels can be stored for each channel 
list (FM1, FM2 and FM3). (18 channels in total)
   The channel list switches as shown below, each time 
[Band] is selected.
  FM1
FM2
FM3
  Select a stored station
Selects the stored station.
Select a station (number) from the 
Preset stations.
   The radio switches to the selected station.
 Auto preset memory
Search automatically for receivable stations and store 
them. (Up to 18 FM and 6 AM stations)
Touch and hold [Auto. P] for at least 
2 seconds.
   Auto preset mode is engaged and the Auto 
preset mode indicator illuminates.
   Stations are stored in order of reception quality.
   The stored stations are overwritten and updated 
every time this operation is performed.
   If no receivable stations are found, tuning goes 
through the whole frequency range and returns 
to the original station.
Note:
   Even in Auto preset mode, station selection and 
manual preset can still be used.
   Under FM, [Each] or [All] can be selected to specify 
the Auto presetting range.
 
 [Each]: 
 
Auto presetting is performed for the displayed 
list band (6 channels). The other two lists are 
not subject to Auto preset mode.
 
 [All]:   
Auto presetting is performed for all lists FM1 
to 3 (18 channels).
  To cancel Auto preset mode
Select [Auto. P].
   Auto preset mode is cancelled.
   Stations stored under Auto preset mode are 
cleared.
   The radio returns to the preset station that was 
stored before Auto preset mode was engaged.
Disc insert (CD/DVD)
1 Press 
.
   The Open/Tilt/Eject screen is displayed.
2
Select [Disc].
   The monitor opens.
   If there is a disc inside, it is ejected 
automatically.
3
Insert a disc.
Printed side
   The monitor closes automatically.
Note:
   The disc is played automatically after insertion.
   3
 {8 cm} discs can only be inserted in a 3 {8 cm} disc 
cartridge.
  The DVD Hint screen
The DVD Hint screen is displayed when a DVD is 
inserted. It presents a simple explanation of DVD 
operation.
Check the explanation, then select 
[OK].
   The DVD Hint screen disappears.
Note:
   Once [OK] is selected, the DVD Hint screen will not 
be displayed again until the engine stops. It appears 
again after the engine is restarted or the key is turned 
to ACC ON.
Disc eject (CD/DVD)
1
Select [Disc] on the Open/Tilt/Eject 
screen.
   The monitor opens and the disc is ejected.
2
Remove the CD/DVD.
   Select [Close] to close the monitor.
  Pressing 
 also closes the monitor.
Play a  disc
Radio 
(continued)
English
English
72
73
73
72