Panasonic KX-TS620 Bedienungsanleitung
14
Settings
For assistance, please visit http://www.panasonic.com/phonehelp
LCD Contrast
You can select the LCD contrast level
from 1 to 4 by programming. To make
the display clearer, set to high level.
Your phone default setting is 2.
from 1 to 4 by programming. To make
the display clearer, set to high level.
Your phone default setting is 2.
Make sure that the handset is on the
cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET
indicator light is off.
cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET
indicator light is off.
1
Press {FUNCTION/EDIT}.
2
Scroll to “
Program ?” by
pressing {
4
}
or {
3
}
and press
{
OK} (
Yes key).
3
Scroll to “
LCD contrast ?” by
pressing {
4
}
or {
3
}
and press
{
OK} (
Yes key).
• The current setting is displayed.
4
Select the desired contrast by
pressing {
pressing {
4
}
or {
3
}
, then press
{
OK} (
Save key).
• A long beep sounds.
• The display will return to step 3. To
• The display will return to step 3. To
exit
the programming mode, press
{
EXIT} or wait for 60 seconds.
• You can exit the programming mode any
time by pressing {EXIT}.
Ringer Volume
Make sure that the AC adaptor is
connected and the unit is not being
used.
connected and the unit is not being
used.
To select HIGH (default), MID or
LOW, press {HOLD/RINGER}.
LOW, press {HOLD/RINGER}.
• Each time you press the button, the ringer
volume will change and the selected
volume will ring.
To turn the ringer OFF, press and hold
{
{
HOLD/RINGER} until 2 beeps sound.
• “
”
is displayed.
To turn the ringer ON, press {HOLD/
RINGER}.
RINGER}.
• The ringer will sound at the HIGH level.
Caller ID Number Auto Edit
Once you call back an edited number,
this unit will remember Area Code and
Format of the Edited Number. Next time
when someone calls from the same
Area Code, caller information will be
customized by the unit as follows:
this unit will remember Area Code and
Format of the Edited Number. Next time
when someone calls from the same
Area Code, caller information will be
customized by the unit as follows:
s When the call is being received, the
Caller ID number will be displayed in the
same Format as the Edited Number.
same Format as the Edited Number.
s After the call is ended, the telephone
number of the caller, when reviewed from
the Caller list, will be displayed in the
same Format as the Edited Number.
the Caller list, will be displayed in the
same Format as the Edited Number.
For example, you can use this feature to
set the unit to ignore the area code of
callers in your area code, so that you
can call these local numbers using
caller information without dialing the
area code. To activate this feature, you
must edit an item in the caller list, then
call this number. After that, phone
numbers from that caller’s area code
are edited automatically. This feature
can be turned on or off (p
set the unit to ignore the area code of
callers in your area code, so that you
can call these local numbers using
caller information without dialing the
area code. To activate this feature, you
must edit an item in the caller list, then
call this number. After that, phone
numbers from that caller’s area code
are edited automatically. This feature
can be turned on or off (p
. 15).
Your phone default setting is ON.
Low
!!!!
High
[OK]=Save
LCD contrast
TS620bk01.book Page 14 Thursday, June 1, 2006 2:15 PM