Panasonic KX-TG2344 Betriebsanweisung

“No link to base. Move 
closer to base, try 
again.” is displayed and an 

alarm tone sounds.

• You are too far from the base unit. Walk closer 

to the base unit.

• Confirm the base unit’s AC adaptor is plugged 

in.

• Raise the base unit antenna.
• If the above remedies do not solve the 

problem, the handset may have lost 
communication with the base unit. Register 
the handset again (p. 48).

Static, sound cuts in/out, 
fades. Interference from 
other electrical units.

• Move the handset and base unit away from 

other electrical appliances (p. 3).

• Walk closer to the base unit.
• Raise the base unit antenna.

The handset does not ring.

• The ringer volume is turned off. Set to high, 

medium, or low (p. 17).

The handset display is blank.

• If only the handset display is blank, fully 

charge the battery (p. 10).

You cannot program any 
function items.

• Programming is not possible while the handset 

and/or base unit is being used.

• Do not pause for over 60 seconds while 

programming.

• Walk closer to the base unit.
• While another user is listening to messages or 

the Answering System is handling a call, you 
cannot program. Try again later.

While programming or 
searching, the handset starts 
to ring and the program/
search stops.

• A call is coming in. To answer the call, press 

[C] or [s]. Start again from the beginning 
after hanging up.

You cannot make an 
intercom/outside call.

• Your handset is in remote operation mode 

(p. 52). Exit by pressing [OFF].

• The handset you called is too far from the 

base unit.

• If the handset or base unit is in use, you may 

not be able to make a call. Try again later.

You cannot redial.

• If the last number dialed was more than 

48 digits long, the number will not be redialed 
correctly.

PQQX13990YA.book  66 ページ  ２００４年１月２６日　月曜日　午前８時２８分