Wasp wpa206 Verweisanleitung
11
Product Reference Guide
First Operation of the Wasp WPA206
Pressing the ON/OFF Key
The Wasp WPA206 welcome screen appears.
The Windows CE
The Windows CE
®
screen will appear shortly
thereafter.
Adjusting Screen Brightness
Press [FUNC] key and Cursor key to decrease
or increase screen brightness.
or increase screen brightness.
Calibrating the WPA206
The WPA206 will prompt you to calibrate the unit
by tapping a sequence of screen locations. Tap
gently but firmly. When you have completed the
series of taps, press the [ENT] key to confirm it
or press the [ESC] key to cancel it.
by tapping a sequence of screen locations. Tap
gently but firmly. When you have completed the
series of taps, press the [ENT] key to confirm it
or press the [ESC] key to cancel it.
This screen will automatically appear when the
unit is powered-on for the first time or after the
system is reset. This screen can also be ac-
cessed at any time by pressing the hot key
[FUNC] and the [ESC] key.
unit is powered-on for the first time or after the
system is reset. This screen can also be ac-
cessed at any time by pressing the hot key
[FUNC] and the [ESC] key.
Setting Time Zone, Date, and Time
After Calibrating the WPA206, the “Date/Time
Properties” dialog box will appear. Follow the
steps below to set the date and time.
Properties” dialog box will appear. Follow the
steps below to set the date and time.
Protective Screen Film
The WPA206 screen ships with a protective plastic film. You may remove this if
desired by peeling from one corner. The screen will be more susceptible to
scratching without the film, but will be more readable.
desired by peeling from one corner. The screen will be more susceptible to
scratching without the film, but will be more readable.