WatchGuard x1000 Hardwarehandbuch
CHAPTER 2:
24
Hardware Guide
The tables below provide pin-out descriptions for both a straight-through
and a RJ-45 (Cat5) cross-over cable.
and a RJ-45 (Cat5) cross-over cable.
Firebox System Area
WatchGuard ships the Firebox III with a fixed, baseline set of
functionality stored on the read-only system area of the Firebox flash disk
memory. It is possible to start the Firebox using this read-only system
area when the primary user area is misconfigured or corrupted. This
functionality allows you to:
•
functionality stored on the read-only system area of the Firebox flash disk
memory. It is possible to start the Firebox using this read-only system
area when the primary user area is misconfigured or corrupted. This
functionality allows you to:
•
Troubleshoot problems where all access to the Firebox is lost
•
Reset Firebox passphrases when you do not know or have forgotten
them
them
Fireboxes shipped before LiveSecurity System 4.1 shipped with the
original, standard functionality called the read-only system area.
Fireboxes shipped with LiveSecurity System 4.1 or later contain both the
original, standard functionality called the read-only system area.
Fireboxes shipped with LiveSecurity System 4.1 or later contain both the
Pin Number
Pin Number
1 (Transmit
Plus)
1 (Transmit
Plus)
2 (Transmit -)
2 (Transmit -)
3 (Receive Plus)
3 (Receive Plus)
6 (Receive -)
6 (Receive -)
4,5,7,8
Not Used
Pin Number
Pin Number
1 (Transmit
Plus)
3 (Receive Plus)
2 (Transmit -)
6 (Receive -)
3 (Receive Plus)
1 (Transmit
Plus)
6 (Receive -)
2 (Transmit -)
4,5,7,8
Not Used