WatchGuard ssl core Hardwarehandbuch

18

4

With your thumbs, press the two tabs in the center of the 
hard drive tray outward slightly to release the tray arms. Pull 
the arms gently until they are fully open.

5

Remove the tray by pulling on the arms until the tray slides 
out of the Firebox. Keep the tray in a safe place. If you ever 
remove the hard drive from your Firebox, you must replace 
the original tray at that time.

6

Remove the new hard drive from its packaging. Prepare it 
for installation by using your thumbs to press the two tabs 
in the center slightly outward to release the tray arms. Pull 
the arms gently until they are fully open.

7

Insert the hard drive tray into the hard drive slot on the 
front of the Firebox. Using the tray arms, push the tray in 
until the tray is fully seated.

If you have trouble pushing the hard drive in, move it slightly from 
side to side while applying firm inward pressure.

8

Push the tray arms toward the center and push gently on 
the two tabs until they click to lock the arms into place. 

If the two tabs do not click, the tray is not fully inserted into the 
Firebox. Extend the tray arms and push the tray in further.

9

Close the door.

If the door does not close completely, the tray is not fully inserted 
into the Firebox. Extend the tray arms and push the tray in further.

The hard drive tray must be fully inserted into the Firebox 
before you turn the Firebox power on. The hard drive tray is 
installed correctly if:
    *the hard drive tray arms swing in completely and the two 
tabs click into place; and